
Initial Setup
Ethernet Setup
You must run a Web browser to communicate and configure the XDI Ethernet. Microsoft Internet Explorer or Netscape Communicator are such examples.
Important: Ensure that the unit’s IP address is unique on the network. Ensure the computer’s IP address and
Configure Ethernet settings:
1.Run your Web browser program.
2.In the address box type in the “Default IP” (Table
3.Select the “Setup” link located on the upper left hand side.
4.Configure the Ethernet settings to your unique setup (see “Setup Page” on page
Table 4-1 Default Settings
Setting | Default Value |
Default IP | 192.168.1.1 |
Gateway IP | 0.0.0.0 |
255.255.255.0 | |
Domain Name Server 1 | 0.0.0.0 |
Domain Name Server 2 | 0.0.0.0 |
SMTP (email) Server | none |
Email Alert Address | none |
Password | 12345 |
Important: Be careful when you change the network settings. If they are changed to a value where communication can not be established any more, a hard reset must be done (see “Resetting” on page