Xantrex Technology C40R/50 Remote, C40R/100 Remote manual Faceplate and Remote Features

Page 10

3 Features

The C-Series Meters have three features:

•a Liquid Crystal Display (LCD) to show current, voltage, amperage, resettable amp hours and total amp hours,

•an Amp-hour Reset Button, which is also used to illuminate or dim the display, and

•a Light Emitting Diode (LED) to indicate system status.

LCD Display

Amp-hour Reset/

Backlight Button

Status LED

The Remote

The Faceplate

Figure 2 Faceplate and Remote Features

The remote is supplied with either a 50-foot (15 m) or a 100-foot

(30.5 m) communications cable. Cable runs up to 1,000 feet (305 m) can be used, but cables exceeding 100 feet are not provided by Xantrex.

4	975-0123-01-01 Rev A

Image 10

Contents Series Meter Display Page Series Meter Display Date and Revision Contents Page Introduction Faceplate and RemoteImportant Safety Information Additional Safety Guidelines Features Faceplate and Remote FeaturesLiquid Crystal Display LCD Information Type Display Value/RangeAmp-Hour Reset and Backlight Button LED Status IndicatorInstallation See Jumper Installation on page 8 for instructionsJumper Installation Step To select and set the voltageJumper Locations on the FacePlate and Remote Cable Installation Step To connect the Faceplate to the C-Series controllerConnecting the Faceplate To connect the remote Connecting the Remote Mounting the Remote Step Minimum Clearance for the Remote16 116 mm To Mount the Remote Status Indicator OperationResetting the Amp-Hour Meter TroubleshootingTurning the Display Backlight On or Off Warranty and Return WarrantyTelephone Rev a Disclaimer ProductExclusions Return Material Authorization Policy Return Procedure Out of Warranty Service Other Xantrex ProductsPage Xantrex Technology Inc