Xantrex Technology C40R/50 Remote, C40R/100 Remote, C40R/50, C40R/100, DVM/C40 To Mount the Remote

To Mount the Remote:

1.Use the remote as a template and mark the positions for the screw holes. Mark the open area to be cut out for the circuit board.

2.Drill out the four screw’s holes and prepare wire access opening/clearance. If using a double-gang, non-metallic, outlet box, install it according to the manufacturer’s instructions.

3.Connect the communications cable (from the C-Series controller).

4.Secure the faceplate using screws (and anchors if necessary).

Mounting Holes

Mounting Holes
	SAMPLE - Double-gang,
	non-metallic, outlet box

Figure 10 Mounting the Remote

16 975-0123-01-01 Rev A