Xantrex Technology C40R/100 Remote, C40R/50 Remote manual Additional Safety Guidelines

Page 9

Warnings and Cautions

WARNING: Explosion Hazard

Do not use the C-Series Meter Display in the presence of flammable fumes or gases. Do not use the C-Series Meter Display in an enclosure containing automotive-type, lead-acid batteries. These batteries, unlike sealed batteries, vent explosive hydrogen gas, which can be ignited by sparks from electrical connections.

WARNING: Shock Hazard

Ensure all power sources are disconnected before proceeding.

Failure to follow these safety guidelines may cause personal injury and/or damage to the C-Series Meter Display. It may also void your product warranty.

Additional Safety Guidelines

Be sure to read, and adhere to, the Safety Guidelines listed in the Owner’s Manual for the C-Series Multifunction DC Controller.

975-0123-01-01 Rev A

3

Image 9
Contents Series Meter Display Page Series Meter Display Date and Revision Contents Page Faceplate and Remote IntroductionImportant Safety Information Additional Safety Guidelines Faceplate and Remote Features FeaturesInformation Type Display Value/Range Liquid Crystal Display LCDLED Status Indicator Amp-Hour Reset and Backlight ButtonSee Jumper Installation on page 8 for instructions InstallationTo select and set the voltage Jumper Installation StepJumper Locations on the FacePlate and Remote To connect the Faceplate to the C-Series controller Cable Installation StepConnecting the Faceplate To connect the remote Connecting the Remote Minimum Clearance for the Remote Mounting the Remote Step16 116 mm To Mount the Remote Operation Status IndicatorTroubleshooting Resetting the Amp-Hour MeterTurning the Display Backlight On or Off Warranty Warranty and ReturnTelephone Rev a Product DisclaimerExclusions Return Material Authorization Policy Return Procedure Other Xantrex Products Out of Warranty ServicePage Xantrex Technology Inc