Xantrex Technology C40R/50, C40R/100, DVM/C40, C40R/100 Remote manual Important Safety Information

Page 8

Read this guide before connecting or using the C-Series Meter Display, and save it for future reference. The main topics in the guide are as follows:

“Important Safety Information” on page 2

“Features” on page 4

“Installation” on page 7

“Operation” on page 17

“Troubleshooting” on page 18

“Warranty and Return” on page 19

2 Important Safety Information

Misusing or incorrectly connecting the C-Series Meter Display may damage the equipment or create hazardous conditions for users. Read the following safety instructions and pay special attention to all Warnings and Cautions statements in the guide.

Warnings identify conditions that may result in personal injury or loss of life.

Cautions identify conditions or practices that may damage the unit or other equipment.

2

975-0123-01-01 Rev A

Image 8
Contents Series Meter Display Page Series Meter Display Date and Revision Contents Page Introduction Faceplate and RemoteImportant Safety Information Additional Safety Guidelines Features Faceplate and Remote FeaturesLiquid Crystal Display LCD Information Type Display Value/RangeAmp-Hour Reset and Backlight Button LED Status IndicatorInstallation See Jumper Installation on page 8 for instructionsJumper Installation Step To select and set the voltageJumper Locations on the FacePlate and Remote Cable Installation Step To connect the Faceplate to the C-Series controllerConnecting the Faceplate To connect the remote Connecting the Remote Mounting the Remote Step Minimum Clearance for the Remote16 116 mm To Mount the Remote Status Indicator OperationTurning the Display Backlight On or Off TroubleshootingResetting the Amp-Hour Meter Warranty and Return WarrantyTelephone Rev a Disclaimer ProductExclusions Return Material Authorization Policy Return Procedure Out of Warranty Service Other Xantrex ProductsPage Xantrex Technology Inc