Fujitsu PRN608-S user manual I/F-COM simple command set

PRN608-S

3.8I/F-COM simple command set.

The following commands are use when communicating with the printer controller. All other commands is ignored

3.8.1	Small Font
	[Name]	Small Font (8x12)
	[Format]	ASCII	NUL
		Hex	00
		Decimal	0
	[Description]	Chooses small font from the current print position.
3.8.2	Low Font
	[Name]	Low Font (16x12)
	[Format]	ASCII	SOH
		Hex	01
		Decimal	1
	[Description]	Chooses low font from the current print position.
3.8.3	Narrow Font
	[Name]	Narrow Font (8x28)
	[Format]	ASCII	STX
		Hex	02
		Decimal	2
	[Description]	Chooses narrow font from the current print position.
3.8.4	Normal Font
	[Name]	Normal Font (16x28)
	[Format]	ASCII	ETX
		Hex	03
		Decimal	3
	[Description]	Chooses normal font from the current print position.
		This is the default font after power up or reset.
3.8.5	Wide Font
	[Name]	Wide Font (32x28)
	[Format]	ASCII	EOT
		Hex	04
		Decimal	4

28-03-2003 Page 3-21 of 53