System Description Installation | Fujitsu PRN608-S guide

PRN608-S

1	SYSTEM DESCRIPTION			1-7
2	INSTALLATION			2-7
	2.1	UNPACKING		2-7
	2.2	LABELS		2-7
	2.3	INSTALLATION		2-7
	2.4	POWER SUPPLY		2-8
	2.5	SETTINGS		2-8
	2.6	SERIAL INPUT/OUTPUT		2-11
	2.6.1		Serial data transfer	2-12
		2.6.1.1	Serial input/output port	2-12
	2.6.2		Setting functions	2-12
	2.7	THERMAL HEAD CONTROL		2-13
	2.7.1		Thermal Head Drive Operation	2-13
	2.7.2		Peak power limitation	2-13
	2.7.3		Head Control Circuit	2-14
	2.7.4		Head temperature measurement circuit	2-14
	2.7.5		Vhead interrupt circuit	2-14
SPECIFICATIONS				2-16
3	FUNCTION			3-17
	3.1	GENERAL		3-17
	3.2	SERIAL COMMUNICATION		3-17
	3.3	USB COMMUNICATION		3-17
	3.4	IRDA COMMUNICATION		3-17
	3.5	FIRMWARE UPGRADE		3-18
	3.6	AUTO FORM FEED		3-18
	3.7	CHARACTER DESIGN		3-19
	3.7.1		Normal Character	3-19
	3.7.2		Low Character	3-19
	3.7.3		Underline	3-19
	3.7.4		Bold	3-20
	3.7.5		Reverse	3-20
	3.7.6		Italic	3-20
	3.7.7		Font sizes	3-20
	3.8	I/F-COM SIMPLE COMMAND SET		3-21
	3.8.1		Small Font	3-21
	3.8.2		Low Font	3-21
	3.8.3		Narrow Font	3-21
	3.8.4		Normal Font	3-21
	3.8.5		Wide Font	3-21
	3.8.6		High Font	3-22
	3.8.7		Large Font	3-22
	3.8.8		Xlarge Font	3-22
	3.8.9		Line Feed	3-22
	3.8.10		Barcode on	3-22
	3.8.11		Feed Forward	3-23
	3.8.12		Reverse off	3-23
	3.8.13		Reverse on	3-23
	3.8.14		Underline off	3-23
	3.8.15		Underline on	3-23
	3.8.16		Bold off	3-24
	3.8.17		Bold on	3-24

28-03-2003 Page 1-4 of 53

SYSTEM DESCRIPTION