
8Click one of the listed team members, click "Edit Member IP Address", type the member IP address in the "IP Address" box, and then click [OK].
`All of the member IP addresses must be in the same subnet as the subnet for the probe targets.
9Repeat step 8 for each of the other listed team members.
10Click [Apply].
Viewing the Team Properties and Statistics
The following shows how to view the team properties and statistics.
1Click the name of the newly created team.
2Click the "Statistics" tab to view the team statistics.
Saving and Restoring a Configuration
The following shows how to save a configuration.
1Click the "File" menu → "Team Save As".
2Type the path and file name of the new configuration file, and then click "Save".
A .bcg extension is added. The configuration file is a text file that can be viewed by any text editor. The file contains information about both the adapter and the team configuration.
The following shows how to restore a configuration.
1Click the "File" menu → "Team Restore".
2Click the name of the file to be restored, and then click [Open].
`If necessary, go to the folder where the file is located.
3Click [Apply].
4Click [Yes] when the message is displayed indicating that the network connection will be temporarily interrupted.
If a configuration is already loaded, a message is displayed that asks if you want to save your current configuration.
Click [Yes] to save the current configuration. Otherwise, the configuration data that is currently loaded is lost.