Fujitsu M4097D manual Function

Page 15

	No.		Function
	1	Document cover	Closes over and keeps in place the document to be
	1	Document cover	read.
			read.

	2	Document bed	Holds document to be read. Also called Flatbed
	2	Document bed	(FB).
			(FB).

	3	Document holding pad	Presses document to the Document bed.

	4	Automatic document feeder	Automatically feeds documents to the reading
	4	(ADF)	position.
		(ADF)	position.

	5	Stacker	Stacks the read documents.

	6	Power switch	Turns the power on of off.

	7	Operator panel	Contains indicator panel that indicates scanner
	7	Operator panel	status.
			status.

	8	ADF paper chute	Holds the documents to be fed by the automatic
	8	ADF paper chute	document feeder (ADF).
			document feeder (ADF).

	9	ADF lever	Opens/closes the ADF to enable the removal of
	9	ADF lever	documents jammed in the feeder.
			documents jammed in the feeder.

	10	Power inlet	Connects to an AC power outlet with the power
	10	Power inlet	cable.
			cable.

	11	Interface connectors	Connects to the host system with interface cables.

	12	Third party slot	A Fujitsu Video Interface Option Board is installed.

1-3

Image 15

Contents M4097D Image Scanner M4097D Image Scanner Revisions, Disclaimers Page Fujitsu France S.A Fujitsu OfficesPage Preface Conventions Contents DE-1 Activating the Setup Mode Contents of the Setup ModeGL-1 IN-1Terms Index Components Checking the Components M4097D Units and AssembliesFunction Assemblies Operator Panel Button/LED Function Counter Function Counter DisplayOperation status Temporary error Alarm Page Page Chapter describes how to install and connect the scanner InstallationandconnectionsPrecautions Inspection Fujitsu Limited Repositioning the Shipping Lock Cable Connections Connecting the power cableConnecting the interface cables Mounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Page Operatinginstruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting ADF Loading Documents on the ADFMore than 30mm Feed direction ABD Max mm Page Loading Documents on the Flatbed Scanner parts involved when loading documentsLoading Documents Larger than the Document Bed Reading a Page from a Thick Book Page Adfdocumentspecification Scanner Maximum Minimum Document SizeDocument type Paper weightPrecautions Document QualityMore than 30 mm Country Unit Conversion ADF Document Feeder CapacityAreas not to be Perforated Grounding color area Grounding Color AreasDouble Feed Detection Condition Job Separation Sheet Scannerspecifications Specification Remarks Basic Product SpecificationSpecification Installation SpecificationDimensions Page Consumablesandoptions Consumables Name Specification RemarksName Remarks OptionsVideo Interface Option How to Install the Video Interface Option BoardPage AT2 Without IPC With IPC-4D Description OptionParameter Description Parameter Description IPC-4D Option This chapter describes the setup mode of the scanner SetupmodeActivating the Setup Mode Contents of the Setup Mode Scsi ID Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Setting the pick start time Reset of the abrasion counterSetting the time-out limit Page Scsi ID Setting Scsi Terminator SettingIPC Status Display Low Power Mode Setting Select Interface Select Built-In/IPC-4D Image Processing Display the TPS Board ID NumberIPC-4D Image ProcessingAbrasion counter GlossaryoftermsDensity Front-side reading = Front-side scanning IPC-4D Paper JAM SCSI-ID TPS GL-8 Index LCD Page Declarations of Conformity DE-2 This manual uses recycled paper

Related manuals

Manual 101 pages 26.55 Kb