Fujitsu M4097D manual More than 30 mm

Page 52

CAUTION

As there is always a possibility that a document may be damaged when using the ADF, important original documents should never be fed through the ADF. Instead, read them manually in flatbed mode.

NOTICES

1.When scanning a translucent document, set the density to light mode.

2.Carbonless papers have a chemical composition that damages the Pad and Pick roller. Therefore, note the following:

Cleaning:

If misspicks occur frequently, clean the Pad and Pick roller in

 

accordance with the “Cleaning and Maintenance” manual.

Replacement of parts:

The life of the Pad and Pick roller may be shorter than if PPC paper

 

documents are fed.

3.The leading edge of all documents fed using the ADF should be straightened so the curl of the paper meets the specifications shown below:

More than

 

More than

30 mm

 

30 mm

Less than

Feed direction

Feed direction

 

3 mm

Less than

 

 

 

 

5 mm

 

Top of the paper

Read surface

 

Top of the paper

Read surface

 

 

4-3

Image 52
Contents M4097D Image Scanner M4097D Image Scanner Revisions, Disclaimers Page Fujitsu Offices Fujitsu France S.APage Preface Conventions Contents Activating the Setup Mode Contents of the Setup Mode GL-1IN-1 DE-1Terms Index Components Checking the Components Units and Assemblies M4097DFunction Assemblies Operator Panel Button/LED Function Counter Display Counter FunctionOperation status Temporary error Alarm Page Page Installationandconnections Chapter describes how to install and connect the scannerPrecautions Inspection Fujitsu Limited Repositioning the Shipping Lock Connecting the power cable Cable ConnectionsConnecting the interface cables Mounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Page Operatinginstruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting Loading Documents on the ADF ADFMore than 30mm Feed direction ABD Max mm Page Scanner parts involved when loading documents Loading Documents on the FlatbedLoading Documents Larger than the Document Bed Reading a Page from a Thick Book Page Adfdocumentspecification Document Size Scanner Maximum MinimumPaper weight PrecautionsDocument Quality Document typeMore than 30 mm ADF Document Feeder Capacity Country Unit ConversionAreas not to be Perforated Grounding Color Areas Grounding color areaDouble Feed Detection Condition Job Separation Sheet Scannerspecifications Basic Product Specification Specification RemarksInstallation Specification SpecificationDimensions Page Consumablesandoptions Name Specification Remarks ConsumablesOptions Name RemarksHow to Install the Video Interface Option Board Video Interface OptionPage Without IPC With IPC-4D Description Option AT2Parameter Description Parameter Description IPC-4D Option Setupmode This chapter describes the setup mode of the scannerActivating the Setup Mode Contents of the Setup Mode Scsi ID Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Reset of the abrasion counter Setting the pick start timeSetting the time-out limit Page Scsi Terminator Setting Scsi ID SettingIPC Status Display Low Power Mode Setting Select Interface Display the TPS Board ID Number Select Built-In/IPC-4D Image ProcessingImage Processing IPC-4DGlossaryofterms Abrasion counterDensity Front-side reading = Front-side scanning IPC-4D Paper JAM SCSI-ID TPS GL-8 Index LCD Page Declarations of Conformity DE-2 This manual uses recycled paper
Related manuals
Manual 101 pages 26.55 Kb