Fujitsu M4097D manual Counter Display, Counter Function

Counter Display

The scanner is provided with the counter display.

Paper counter

		Abrasion counter
Counter	Function
Paper counter	When the	The paper counter counts the number of scanned
	button is pressed	sheets from the start of reading until Paper Empty or
		an error is detected. The counter is automatically reset
		at the start of reading. The counter is used for
		checking the number of the sheets scanned in one
		batch.
	When the	This counter increments each time a document is
	button is pressed	scanned. It is not initialized until the power is turned
		off. The counter can be used, for example, for checking
		the number of sheets that have been scanned in one
		day.
Abrasion counter	The abrasion counter counts the accumulated number of scanned sheets.
	This counter increments every 10 sheets. It is useful to check the cleaning
	cycle or the parts replacement cycle. How to reset it is described in
	Chapter 6.

NOTICE

When the counter value is 0, no number is displayed.

1-7