2 Fan the sheets before setting a stack of documents on the ADF paper chute.
Document
10mm
NOTICES
•Remove paper clips and staples. Flatten the staple holes.
•Read the following documents using the Flatbed:
-Paper with clip or staple.
-Paper with wet ink.
-Paper of uneven thickness (for example, envelopes).
-Paper with large rumples or curls.
-Paper with folds or tears.
-Tracing paper.
-Coated paper.
-Carbon paper.
-Paper smaller than A8 (portrait) size or wider than A3 size.
-Materials other than paper (for example, clothes, sheet metal, or OHP film).
-Photographic paper.
-Paper with perforations on the side.
-
-Very thin paper.
•Set documents on the ADF so that the curl of the leading edge does not exceed the measures shown below.
More than 30mm | Feed direction | More than 30mm | |
Less than | Less than | ||
| |||
3mm |
| ||
| 5mm | ||
|
| ||
Top of the paper | Read surface | Top of the paper |
• To avoid skewing, do no feed docments of different widths during the same batch.
