Fujitsu M4097D manual Button/LED Function

Button/LED Function

Name of the button and		Function
LED
Button	Next	Displays the next LCD screen.
	Previous	Displays the Previous LCD screen.
		Moves the cursor to the left.
		Moves the cursor to the right.
	Exit	When you are entering settings on the Operator panel, pressing this button
		returns you immediately to the “Scanner Ready” screen.
	Enter	Enters the parameter currently selected by the cursor.
	Send To/	Operational only when Manual start mode is set or the “Read” lamp lights;
	Start	Starts the reading when video interface option is used. Some application
		software packages might use this button.
	Stop	When the “Check” LED lights, pressing this button releases the error status
		(turns off ” Check” and returns to the “Scanner Ready” screen).
		Operational only during the reading operation; stops the reading when the
		video interface option is used.
		Also turns off the “Check” lamp.
LED		Indicates that the scanner is ON.
	Read	Indicates the scanner is reading or ready to read.
	Check	• If lit, this indicates that an alarm occurred. Pressing the “Stop” button
		turns the “Check” lamp off.
		• If it blinks at one second intervals, this means that a jam or double feed
		has been detected. If the problem is jammed paper, removing the jammed
		paper turns off the “Check” lamp. If the problem is double feed, pressing
		the “Stop” button turns off the “Check” lamp.
		• If it blinks at four second intervals, this means that cleaning the ADF is
		necessary.

1-6