Fujitsu M4097D manual Precautions

Page 26

Precautions

This section describes precautions to follow when installing the scanner.

To ensure the longevity and proper functioning of your scanner, do not install the scanner in the places and environments described below.

Place the scanner away from electrical noise sources, strong magnetic fields, and air flow. If the scanner is used near an air conditioner, copying machine, or TV set, the scanner may operate incorrectly.

Keep the scanner out of the sun and away from heaters. These environments may shorten the scanner life or cause hardware failures.

Do not install the scanner in a place where vibrations may occur. This environment may cause hardware failures or may cause the scanner to operate incorrectly.

Do not install the scanner in humid, dusty, or damp places. These environments may shorten the scanner life or cause hardware failures.

Do not place the scanner where liquid spills may occur.

Be aware of static electricity, which can damage the scanner’s sensitive electronic parts. Be sure the flooring and the desk are made of materials that do not generate static electricity.

For information on the minimum required size of the installation space, see Chapter 5,

“SPECIFICATIONS”.

2-1

Image 26
Contents M4097D Image Scanner M4097D Image Scanner Revisions, Disclaimers Page Fujitsu Offices Fujitsu France S.APage Preface Conventions Contents IN-1 Activating the Setup Mode Contents of the Setup ModeGL-1 DE-1Terms Index Components Checking the Components Units and Assemblies M4097DFunction Assemblies Operator Panel Button/LED Function Counter Display Counter FunctionOperation status Temporary error Alarm Page Page Installationandconnections Chapter describes how to install and connect the scannerPrecautions Inspection Fujitsu Limited Repositioning the Shipping Lock Connecting the power cable Cable ConnectionsConnecting the interface cables Mounting the Stacker Setting the Scsi ID and the Scsi Terminator Page Page Operatinginstruction Turning the Power On Waking up the Scanner from the Low Power Mode Manual Feed Mode Setting Loading Documents on the ADF ADFMore than 30mm Feed direction ABD Max mm Page Scanner parts involved when loading documents Loading Documents on the FlatbedLoading Documents Larger than the Document Bed Reading a Page from a Thick Book Page Adfdocumentspecification Document Size Scanner Maximum MinimumDocument Quality Paper weightPrecautions Document typeMore than 30 mm ADF Document Feeder Capacity Country Unit ConversionAreas not to be Perforated Grounding Color Areas Grounding color areaDouble Feed Detection Condition Job Separation Sheet Scannerspecifications Basic Product Specification Specification RemarksInstallation Specification SpecificationDimensions Page Consumablesandoptions Name Specification Remarks ConsumablesOptions Name RemarksHow to Install the Video Interface Option Board Video Interface OptionPage Without IPC With IPC-4D Description Option AT2Parameter Description Parameter Description IPC-4D Option Setupmode This chapter describes the setup mode of the scannerActivating the Setup Mode Contents of the Setup Mode Scsi ID Setting double feed detection Paper Thickness Setting double feed detection Paper Length Setting IPC pre-set mode Reset of the abrasion counter Setting the pick start timeSetting the time-out limit Page IPC Status Display Scsi ID SettingScsi Terminator Setting Low Power Mode Setting Select Interface Display the TPS Board ID Number Select Built-In/IPC-4D Image ProcessingImage Processing IPC-4DGlossaryofterms Abrasion counterDensity Front-side reading = Front-side scanning IPC-4D Paper JAM SCSI-ID TPS GL-8 Index LCD Page Declarations of Conformity DE-2 This manual uses recycled paper
Related manuals
Manual 101 pages 26.55 Kb