Fujitsu M3093EX, M3093GX manual Operations, Turning on the Power

CHAPTER 4 OPERATIONS

4.1Turning on the Power

4.2Reading a Document in Flatbed Mode

4.3Reading Documents in ADF Mode

Documents can be read in the flatbed mode or automatic document feeder (ADF) mode. In the flat-bed mode, each document is placed on the document bed and is read one by one. In ADF mode, documents are fed and read automatically.

This section explains how to turn on the power and how to read documents.

NOTICE: If the “Check” indicator blinks in four seconds period, clean the ADF in accordance with the section 5.3.

NOTICE: If the top 3 mm of the read area isn’t left blank (grounding color) by specifying a drop-out color, read the document by selecting photo.

4.1 Turning on the Power

This section explains how to turn on the power.

Press “I” on the power switch. When the power is turned on, the power indicator is lit.

Power switch

Press “O ” on the power switch to turn off the power.

Power OFF Power ON

4 – 1