Cisco Systems manual Sliding the Cisco MDS 9100 Series onto the Slider Rails

Chapter 2 Installing the Cisco MDS 9100 Series

Installing the Switch in a Cabinet or Rack

Step 5 Insert the switch into the rack:

a.By using both hands, position the switch with the back of the switch between the front rack-mounting rails as shown in Figure 2-4. If you are using the notched rails, for the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see Figure 2-5.

b.Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide the C brackets onto the slider rails, and then gently slide the switch all the way into the rack. If the switch does not slide easily, try realigning the C brackets on the slider rails.

Figure 2-4 Sliding the Cisco MDS 9100 Series onto the Slider Rails

91632

Cisco MDS 9100 Series Hardware Installation Guide

OL-16187-01 2-9