Cisco Systems ME 6500 manual Cisco ME 6524 Ethernet Switch ME-C6524GT-8S Specifications

Page 27

Chapter 1 Product Overview

Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S)

Table 1-3

Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S) Features (continued)

 

 

 

 

Feature

 

Description

 

 

 

Downlink ports

The chassis has 24 10/100/1000BASE downlink ports. Each port has an

 

 

RJ-45 connector. A status LED is associated with each port.

 

 

Green—The link is established and operational.

 

 

Amber—The port is disabled.

 

 

Blinking amber—The system has detected a fault with the link.

 

 

Off—No link is established or no network interface cable is installed.

Uplink ports

The chassis front panel has 8 uplink ports. An SFP transceiver must be

 

 

installed in the port socket for the port to operate. Cable type and

 

 

recommended cabling distance are determined by the type of SFP transceiver

 

 

installed in the uplink port. A status LED is associated with each port.

 

 

Green—The link is established and operational.

 

 

Amber—The port is disabled.

 

 

Blinking amber—The system has detected a fault with the link.

 

 

Off—No link is established or the SFP transceiver is not installed.

 

 

 

 

 

Table 1-4lists the specifications of the Cisco ME 6524 Ethernet switch (ME-C6524GT-8S) chassis.

Table 1-4 Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S) Specifications

 

 

 

 

Item

 

Specification

 

 

 

 

Environmental

 

 

 

Temperature, ambient

Certified for operation: 32° to 104°F (0° to 40°C)

operating

 

Designed and tested for operation: 32° to 130°F (0° to 55°C)

 

 

 

 

Note The Cisco ME 6524 Ethernet switch is equipped with internal air

 

 

temperature sensors that generate a minor alarm at 104°F (40°C) and

 

 

a major alarm at 131°F (55°C).

Temperature, ambient

–4° to 149°F (–20° to 65°C)

nonoperating and storage

 

 

Thermal transition

0.5°C per minute (hot to cold)

 

 

0.33°C per minute (cold to hot)

Humidity (RH), ambient

5% to 90%

(noncondensing) operating

 

 

Humidity (RH), ambient

5% to 95%

(noncondensing)

 

 

nonoperating and storage

 

 

Altitude, operating

Certified for operation: 0 to 6500 feet (0 to 2000 m)

 

 

Designed and tested for operation: –200 to 10,000 feet (–60 to 3000 m)

 

 

 

 

Cisco ME 6500 Series Ethernet Switch Installation Guide

 

OL-8900-03

1-11

 

 

 

Image 27
Contents Americas Headquarters Cisco ME 6500 Series Ethernet Switch Installation GuidePage N T E N T S Where to Go Next Power Supply Specifications OL-8900-03 Audience OrganizationChapter Title Description Convention Description ConventionsBewaar Deze Instructies Statement 1071-Warning DefinitionWarnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaAviso Instruções Importantes DE Segurança Spara Dessa Anvisningar GEM Disse Anvisninger Xiii Related Documentation Obtaining Documentation and Submitting a Service Request Xvi Product Overview Cisco ME 6524 Ethernet Switch ME-C6524GS-8SCisco ME 6524 Ethernet Switch ME-C6524GS-8S-Rear View FeatureFeature Description Status LED Specification Operational-5 G 30 ms, half-sine IEC Cisco ME 6524 Ethernet Switch ME-C6524GT-8S-Front View Cisco ME 6524 Ethernet Switch ME-C6524GT-8S Cisco ME 6524 Ethernet Switch ME-C6524GT-8S-Rear View Cisco ME 6524 Ethernet Switch ME-C6524GT-8S Features Status LED Cisco ME 6524 Ethernet Switch ME-C6524GT-8S Specifications Operational-5 G 30 ms, half-sine IEC Safety Preparing for InstallationPreparing for Installation Safety Site Requirements Temperature and Air CirculationAltitude HumidityDust and Contamination CorrosionElectromagnetic and Radio Frequency Interference Grounding Recommendations Shock and VibrationSystem Grounding Electromagnetic EnvironmentPreventing Electrostatic Discharge Damage Preparing for Installation Site Requirements Power Requirements Power Connection Guidelines for DC-Powered Systems Power Connection Guidelines for AC-Powered SystemsCabling Requirements Site Preparation ChecklistTask No. Planning Activity Verified By Time Preparing for Installation Installing the SwitchOL-8900-03 Installing the Switch Preparing for Installation Verifying Package Contents Rack-MountingRequired Tools Attaching L Brackets to the Chassis Installing the Rack-Mount BracketsInstalling the Chassis in the Rack Desk-Top Mounting Installing the Chassis in the RackInstalling the Rubber Feet Installing the System GroundInstalling the System Ground Connecting Source Power to the ChassisConnecting Source DC to the DC-Input Power Supply Connecting Source AC to the AC-Input Power Supply Connecting the Console PortReceive optical bore Transmit optical bore Bail clasp Installing the SFP TransceiversInstalling an SFP Transceiver into an SFP Transceiver Socket Installing the Switch Installing the SFP Transceivers Where to Go Next Powering Up the ChassisOL-8900-03 Removing and Installing the DC-Input Power Supply Removal and Replacement ProceduresRemoving the DC-Input Power Supply Removing the DC-Input Power Supply Installing the DC-Input Power Supply Page Installing the DC-Input Power Supply Removing and Installing the AC-Input Power SupplyIEC 60320 C15 connector Removing the AC-Input Power SupplyInstalling the AC-Input Power Supply Removing and Installing the Fan TrayRemoving the Fan Tray Installing the Fan TrayUpgrading the Memory Location of SP and RP Dram DIMMs Connector edge of the Dimm into the socket connector Installing the Dram Dimm in the Dimm Socket OL-8900-03 DC-Input Power Supply Power Supply SpecificationsFAN OK Specification Description AC-Input Power SupplyGreen-Source AC voltage is OK. Input voltage is 82 VAC or Locale Power Cord Power Supply AC Power CordsFigure A-4 CAB-ACA Australia and New Zealand Power Cord Figure A-7 CAB-ACE Continental Europe Power Cord Figure A-10 CAB-ACU United Kingdom Power Cord SFP Transceiver Specifications Type Fiber Type Micron MHz/km Cable Distance ModalSFP Transceiver Core Size BandwidthGB SFP Transceiver Transmit dBm Receive dBm Product Number MB SFP Transceiver Transmit dBm Receive dBm Product NumberColor Code Cwdm Gbic Wavelength Description ITU Channel Product Number Dwdm SFPDwdm SFP Numerics IN-2 IN-3 IN-4
Related manuals
Manual 14 pages 28.35 Kb