Chapter 3 Installing the Switch
Powering Up the Chassis
Powering Up the Chassis
Turn on the power supply switches to power up the system. During the
Additional system diagnostic tests are available. These tests allow you to perform a complete sanity check on the system prior to inserting the system into your network and to monitor the health of the system while the system is running.
Where to Go Next
If the default configuration is satisfactory, the switch does not need further configuration. However, you may use the CLI from the console to configure the switch as a member of a cluster or as an individual switch. See the Cisco ME 6500 Series Ethernet Switch Software Configuration Guide and the
Cisco ME 6500 Series Ethernet Switch Cisco IOS Command Reference on Cisco.com for information on using the CLI with a Cisco ME 6524 Ethernet switch.
Cisco ME 6500 Series Ethernet Switch Installation Guide
|
| ||
|
|