Cisco Systems ME 6500 manual Status LED

Chapter 1 Product Overview

Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S)

Table 1-3	Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S) Features (continued)
Feature		Description
Chassis front panel features
STATUS LED		The STATUS LED indicates the system health.
		• Green—The system is operating normally.
		• Red—A fault has been detected in the system.
		• Amber—System is booting up.
		• Off—The system is not powered up.
PS1 (Power supply 1) LED		The PS1 LED indicates the status of the power supply installed in power
		supply bay 1.
		• Green—Power supply is on and the input and output voltages are OK.
		• Red—The power supply has a fault.
		• Off—The power supply is off or is not installed.
PS2 (Power supply 2) LED		The PS2 LED indicates the status of the power supply installed in power
		supply bay 2.
		• Green—Power supply is on and the input and output voltages are OK.
		• Red—The power supply has a fault.
		• Off—The power supply is off or is not installed.
FAN		The FAN LED indicates the status of the individual fans in the fan tray.
		• Green—Fan tray is operating normally.
		• Red—One or more individual fans in the fan tray have failed.
RESET switch		A recessed switch allows the user to reset the system.
Console port		A single console port allows the user access to the command-line interface.
		The console port has an RJ-45 connector.
USB ports		The switch has two USB ports:
		• Port 1 is a device port with a Type B USB connector. A standard
		USB 1.1 host, such as a PC, can plug into this port.
		• Port 2 is a host port with a Type A USB connector. A standard USB 1.1
		device, such as flash memory, can plug into this port.
PCMCIA connector		Type 2 CompactFlash devices can be plugged into this connector.

Cisco ME 6500 Series Ethernet Switch Installation Guide

1-10 OL-8900-03