Chapter 4 Removal and Replacement Procedures
Upgrading the Memory
Figure 4-5 Location of SP and RP DRAM DIMMs
rear |
1 |
2 |
280751 |
front |
1
SP DRAM DIMM and socket
2
RP DRAM DIMM and socket
Step 6 Release the old DRAM DIMM from its socket by simultaneously bending the locking spring tab on each side of the socket outward and then pivot the DRAM DIMM up away from the tabs. Be careful not to bend the locking spring tabs too far, because you can break them. (See Figure
Cisco ME 6500 Series Ethernet Switch Installation Guide
|
| ||
|
|