Cisco Systems CGS252016S8PC manual Attaching Brackets for Etsi Racks

Chapter 2 Switch Installation

Installing the Switch

Figure 2-11 Attaching Brackets for 23-Inch Racks

1

2

Phillips flat-head screws 3 Power supply-side mounting position

Cable-side-mounting position

Note For IP-30 compliance: If you use 23-inch brackets, you can insert the rubber plugs in the same holes as shown in Figure 2-7or Figure 2-8before installing the brackets.

Attaching Brackets for ETSI Racks

Figure 2-12shows the mounting bracket locations on the switch for cable-side mounting and power-side mounting onto an ETSI rack.

Cisco CGS 2520 Hardware Installation Guide

78-19377-02 2-13