Cisco Systems 2940 manual Port Mode Color Meaning

Chapter 1 Overview

Front-Panel Description

Table 1-6 Meaning of Port LED Colors in Different Modes

Port Mode	Color	Meaning
STAT	Off	No link.
	Solid green	Link present.
	Flashing green	Activity. Port is sending or receiving data.
	Alternating	Link fault. Error frames can affect connectivity, and errors such as
	green-amber	excessive collisions, CRC errors, and alignment and jabber errors are
		monitored for a link-fault indication.
	Solid amber	Port is not forwarding. Port was disabled by management, an address
		violation, or Spanning Tree Protocol (STP).
		Note After a port is reconfigured, the port LED can remain amber for
		up to 30 seconds while STP checks the switch for possible loops.
DPLX	Off	Port is operating in half duplex.
(half or	Green	Port is operating in full duplex.
full
duplex)
SPD	10/100 ports
	Off	Port is operating at 10 Mbps.
	Green	Port is operating at 100 Mbps.
	10/100/1000 ports
	Off	Port is operating at 10 Mbps.
	Green	Port is operating at 100 Mbps.
	Flashing green	Port is operating at 1000 Mbps.
	SFP modules
	Off	Port is operating at 10 Mbps.
	Green	Port is operating at 100 Mbps.
	Flashing green	Port is operating at 1000 Mbps.

Catalyst 2940 Switch Hardware Installation Guide

1-8 OL-6157-01