Cisco Systems 2940 manual Installing the Mounting Screws Under a Desk

Chapter 2 Installation

Installing the Switch

Figure 2-3 Installing the Mounting Screws Under a Desk

1

2

3

3

5

4

89857

1	Desktop	4	Adhesive
2	Screw template	5	Wall
3	Screws

Step 3 Peel the adhesive strip off the bottom of the screw template, and attach it to the underside of the desk.

Step 4 Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2 inch (12.7 mm) hole in the two screw template slots.

Step 5 Insert three screws in the slots on the screw template, and tighten until they touch the top of the screw template.

Step 6 Remove the screw template from underneath the desk.

Catalyst 2940 Switch Hardware Installation Guide

2-8 OL-6157-01