Cisco Systems 2940 manual Installing the Mounting Screws on Top of a Desk

Chapter 2 Installation

Installing the Switch

Figure 2-1 Installing the Mounting Screws on Top of a Desk

2 2

3

1

4

89859

1

2

Screw template	3	Wall
Screws	4	Desk

Step 3 Peel the adhesive strip off the bottom of the screw template, and attach it to the top of the desk.

Step 4 Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the two screw template slots.

Step 5 Insert three screws in the slots on the screw template, and tighten until they touch the top of the screw template.

Step 6 Remove the screw template from the desk top.

Catalyst 2940 Switch Hardware Installation Guide

2-6 OL-6157-01