Cisco Catalyst Blade Switch 3030 Getting Started Guide
Taking Out What You Need
•Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch 3030
•Registration card
Follow these steps:
1.Unpack and remove the switch module and the accessory kit from the shipping box.
2.Return the packing material to the shipping container, and save it for future use.
Note If the switch modules are ordered with the server chassis, the switch modules are already installed, and no unpacking is required. The unpacking procedure applies only if a switch module is ordered separately.
Cisco Gigabit Ethernet Switch Module Description
Figure 1 shows the switch module, which has these features:
•10 internal Gigabit Ethernet 1000BASE-X ports
•1 console port
•2 external 10/100/1000BASE-T copper Gigabit Ethernet ports
•4 external small form-factor pluggable (SFP) module uplink ports that support 1000BASE-SX fiber and 10/100/1000BASE-T copper (only Cisco SFP modules are supported)
Each port has an LED associated with it. Additionally, there is a System Status/ID LED that is controlled by the Dell Remote Access Controller/Modular Chassis (DRAC/MC) management board.
|
| Cisco Catalyst Blade Switch 3030 Getting Started Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|