Cisco Systems 3030 manual Enter ~

Page 12

Cisco Catalyst Blade Switch 3030 Getting Started Guide

Installing the Switch Module in the Server Chassis

Step 3 On the console monitor, the DRAC/MC application displays a login screen. Log in by using these defaults:

username root password calvin

The DRAC/MC command-line interface (CLI) command prompt DRAC/MC: appears.

Step 4 If the server chassis is off, use this command to power it on:

racadm chassisaction -m chassis powerup

The switch module inserted into the chassis I/O bay automatically powers on when the server chassis powers on. For more information on configuring the server chassis by using the CLI see the Dell Remote Access Controller/Modular Chassis User's Guide.

Step 5 Power cycle the switch module by using this command:

racadm chassisaction -m switch-N powercycle

where N is the chassis I/O module bay number in which the switch module is inserted.

Step 6 Redirect the DRAC/MC console to the switch module internal serial console

interface. Enter this command at the DRAC/MC command prompt:

connect switch-N

where N is the chassis I/O module bay number in which the switch module is inserted.

To return to the command prompt, press this key sequence:

Enter ~.

First press Enter, press tilde ~ (remember to press the <Shift> key if the tilde character is located in the upper register of your keyboard), and then press period . (dot).

Step 7 Go to “Waiting for POST to Complete” section on page 1-13to finish configuring the switch module.

 

Cisco Catalyst Blade Switch 3030 Getting Started Guide

1-12

78-17052-01

Image 12
Contents Cisco Catalyst Blade Switch Getting Started Guide Contents Taking Out What You NeedCisco Gigabit Ethernet Switch Module Description Cisco Gigabit Ethernet Switch Module Dell Modular Server Chassis Architecture Installing the Switch Module in the Server Chassis 143473 Switch module 3 Release latch Server chassis Configuring the Switch Module Connecting through the Switch Module Console PortConnecting through the Switch Module Console Port Connecting through the DRAC/MC Enter ~ Completing the Initial Configuration Waiting for Post to CompleteTo configure Snmp now, enter yes Line vty 0 Managing the Switch Using the CLIUsing the Device Manager Installation Warning Statements Other Management OptionsConnect to the Switch Ports Connect to the 10/100/1000 PortsConnecting to 10/100/1000 Ports Verify Port Connectivity Troubleshooting Initial Configuration Setup Resetting the Switch ConfigurationCase of Difficulty Accessing Help Online Obtaining Documentation For More InformationCisco.com Product Documentation DVDOrdering Documentation Documentation Feedback Cisco Product Security OverviewReporting Security Problems in Cisco Products Emergencies security-alert@cisco.comObtaining Technical Assistance Cisco Technical Support & Documentation WebsiteSubmitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information 78-17052-01 Hardware Warranty Terms Duration of Hardware Warranty 78-17052-01