Cisco Systems manual Cisco uBR7200 Series and the PA-T3 Port Adapter, Overview

C H A P T E R 6

Cisco uBR7200 Series and the PA-T3 Port Adapter

This chapter provides information on the PA-T3 port adapter and its use in the Cisco uBR7200 series universal broadband routers. This chapter includes the following sections:

•

•

•

Overview, page 6-1

Removing a Port Adapter, page 6-2

Installing a Port Adapter, page 6-4

Overview

The PA-T3 port adapter can be installed in any of the available port adapter slots in the

Cisco uBR7200 series routers. Figure 6-1 shows a PA-T3 port adapter installed in port adapter slot 2 of a Cisco uBR7200 series router.

Figure 6-1 Cisco uBR7200 Series with a PA-T3 Port Adapter in Port Adapter Slot 2

PA-T3 port adapter

ENABLED			K	F	DS3 SERIAL
			CL	FER RL
	RCVR	XMTR	R
		IS	F	LL
		A	OO
					15261

Depending on the circumstances, you might need to install a new port adapter or replace a failed port adapter in a Cisco uBR7200 series router. In either case no tools are necessary; all port adapters available for the Cisco uBR7200 series routers connect directly to the router midplane and are locked into position by a port adapter retention clip (Cisco uBR7246) or lever (Cisco uBR7223). When removing and replacing a port adapter, you need an antistatic mat onto which you can place a removed port adapter and an antistatic container into which you can place a failed port adapter for shipment back to the factory.

Cisco uBR7200 Series and the PA-T3 Port Adapter 6-1