Cisco Systems PA-T3 manual Related Documentation Section Title Description

Page 4

Related Documentation

Section

Title

Description

Chapter 3

VIP2 and the PA-T3 Port Adapter

Provides instructions for installing

 

 

the PA-T3 port adapter on a VIP2

 

 

interface processor installed in

 

 

Cisco 7500 or Cisco 7000 series

 

 

routers.

 

 

 

Chapter 4

Catalyst RSM/VIP2 and the PA-T3

Provides instructions for installing

 

Port Adapter

the PA-T3 port adapter on a

 

 

Catalyst RSM/VIP2 installed in

 

 

Catalyst 5000 series switches.

 

 

 

Chapter 5

Cisco 7200 Series and the

Provides instructions for installing

 

PA-T3 Port Adapter

the PA-T3 port adapter in a Cisco

 

 

7200 series router.

 

 

 

Chapter 6

Cisco uBR7200 Series and the

Provides instructions for installing

 

PA-T3 Port Adapter

the PA-T3 port adapter in the

 

 

Cisco uBR7200 series universal

 

 

broadband router.

 

 

 

Chapter 7

Cisco 7100 Series and the PA-T3

Provides information on the PA-T3

 

Port Adapter

and its use in Cisco 7100 series

 

 

routers.

 

 

 

Chapter 8

Configuring the PA-T3 Interfaces

Provides instructions for configuring

 

 

your port adapter on the supported

 

 

platforms. The instructions given in

 

 

this chapter apply to all supported

 

 

platforms described in this document.

 

 

 

Related Documentation

Your router and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:

•For Cisco IOS software configuration information and support, refer to the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware.

Note You can access Cisco IOS software configuration and hardware installation and maintenance documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

•For hardware installation and maintenance information on Cisco 7000 series and Cisco 7500 series routers, and the VIP2, refer to the following publications:

—The installation and configuration guide that shipped with your Cisco 7000 series or Cisco 7500 series router

—Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (for VIP2 users only)

•For hardware installation and maintenance information on the Catalyst 5000 series switches and the Catalyst RSM/VIP2, refer to the following publications:

—The installation and configuration guide that shipped with your Catalyst 5000 series switches

viPA-T3 Serial Port Adapter Installation and Configuration

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PA-T3 Serial Port Adapter Installation and Configuration Corporate HeadquartersPage Preface ObjectivesOrganization Section Title DescriptionRelated Documentation Related Documentation Section Title DescriptionCisco Connection Online Cisco Connection OnlineCisco Documentation CD-ROM Cisco Documentation CD-ROMOverview Port Adapter OverviewPA-T3 Serial Port Adapter Features PA-T3 Serial Port Adapter FeaturesManagement Information Base Management Information Base4PA-T3 Serial Port Adapter Installation and Configuration Preparing for Installation Parts and Tools RequiredSoftware and Hardware Requirements Software and Hardware RequirementsPA-2T3 PA-T3 Port Adapter LEDs PA-T3 Port Adapter LEDsRouter show version LEDs for Uplink Port Status Color State DescriptionFeature Compatibilities of PA-T3 Serial Port Adapter DSUs PA-T3 Receptacles and CablesPA-T3 Receptacles and Cables Full Rate Scrambling Subrate MDL 1 SupportSafety Guidelines Safety GuidelinesElectrical Equipment Guidelines Telephone Wiring GuidelinesElectrical Equipment Guidelines Preventing Electrostatic Discharge Damage FCC Class a ComplianceFCC Class a Compliance FCC Class a Compliance 10PA-T3 Serial Port Adapter Installation and Configuration VIP2 and the PA-T3 Port Adapter OverviewOverview Dimm U5PA-T3 in port adapter Slot PA-T3 in port adapter slot Removing a Port Adapter Removing a Port AdapterInstalling a Port Adapter Installing a Port AdapterH3152 Installing a Port Adapter 8PA-T3 Serial Port Adapter Installation and Configuration Catalyst RSM/VIP2 and the PA-T3 Port Adapter Standoff Removing a Port Adapter Installing a Port Adapter Aligning a Port Adapter in a Port Adapter Slot 6PA-T3 Serial Port Adapter Installation and Configuration Cisco 7200 Series PA-T3 Port Adapter Port adapter Handle Lever unlocked Position Handling a Port Adapter Port adapter Handle Cisco uBR7200 Series and the PA-T3 Port Adapter Port adapters Port adapters Port adapter lever in unlocked position Inside slot guide PC board Metal carrier Port adapter retention clip in locked position 6PA-T3 Serial Port Adapter Installation and Configuration Configuring the PA-T3 Interfaces Using the Exec Command Interpreter Using the Exec Command InterpreterIdentifying Port Adapter Slot and T3 Interface Port Numbers Cisco 7200 Series and Cisco uBR7200 Series PortsCisco 7200 Series and Cisco uBR7200 Series Ports Serial Port Number Example-CiscoVIP2 Ports Identifying Port Adapter Slot and T3 Interface Port NumbersCatalyst RSM/VIP2 Ports Catalyst RSM/VIP2 PortsCisco 7100 Series Ports PA-T3 Serial Port Adapter in the CatalystInterface Subcommand Syntax Platform Command Example Router# configure terminalShutting Down an Interface Shutting Down an InterfaceRouterconfig-if#interface serial 1/0 Routerconfig-if#interface serial 1/1Routerconfig-if#interface serial 1/1/0 Routerconfig-if#interface serial 1/1/1Routerconfig# interface serial 1/0 Router# copy running-config startup-config OKRouter# show interfaces serial 1/0 Router# show interfaces serial 1/1/0Performing a Basic Configuration Routerconfig# interface serial 1/1/0Routerconfig# interface serial 3/0 Performing a Basic ConfigurationConfiguration Example Configuration ExampleSetting the Bandwidth Defining the DSU ModeCustomizing the PA-T3 Serial Port Adapter Enabling T3 ScramblingSetting the Cable Length Configuring Cyclic Redundancy ChecksSpecifying T3 Framing Specifying T3 FramingChecking the Configuration Using show Commands to Verify StatusChecking the Configuration Show running-config command. Display Router# show interfaces serial 2/0 Router# show controllers 2/0 Router# show controllers serial 3/0Febe Router# show controllers serial 10/0/0 Serial10/0/0Router# show controllers serial 0/0 Serial0/0 Router# show version20PA-T3 Serial Port Adapter Installation and Configuration Router# show diag Router# show controllers cbus 1/0/0 Router# show controllers cbus 0/0 Using the loopback Command to Verify the Physical Interface Using the ping Command to Verify Network ConnectionRouterconfig# interface serial 6/0 Set the interface into local loopback mode as follows Using the loopback Command to Verify the Physical Interface26PA-T3 Serial Port Adapter Installation and Configuration Cisco 7100 Series and the PA-T3 Port Adapter Cisco 7120 Series Router-Port Adapter Slot 3 LocationCisco 7140 Series Router-Port Adapter Slot 4 Location Installing a Port Adapter Guides
Top Page Image Contents