Cisco Systems manual 20PA-T3 Serial Port Adapter Installation and Configuration

Page 64

Checking the Configuration

byron uptime is 22 minutes System restarted by reload

System image file is "c7200-p-mz", booted via tftp from 10.0.0.0

cisco 7206 (NPE150) processor with 12288K/4096K bytes of memory.

R4700 processor, Implementation 33, Revision 1.0 (512KB Level 2 Cache) Last reset from power-on

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

4 Ethernet/IEEE 802.3 interfaces.

1 Serial network interface.

1 FDDI network interface.

125K bytes of non-volatile configuration memory.

1024K bytes of packet SRAM memory.

4096K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x2

Following is an example of the show version command used with a Cisco 7500 series router:

router# show version

Cisco Internetwork Operating System Software

IOS (tm) GS Software (RSP-JV-M), Version 11.1(16)CA

Synced to mainline version: 11.1(13.5)

Copyright (c) 1986-1997 by cisco Systems, Inc.

Compiled Sat 06-Sep-97 02:12 by paking

Image text-base: 0x60010900, data-base: 0x60A42000

ROM: System Bootstrap, Version 5.3.2(3.2) [kmac 3.2], MAINTENANCE INTERIM SOFTWARE

ROM: GS Software, Version 11.1(8)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

keats uptime is 22 minutes System restarted by reload

System image file booted via tftp from 10.0.0.0

Last reset from power-on G.703/E1 software, Version 1.0. G.703/JT2 software, Version 1.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp). Bridging software.

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. TN3270 Emulation software (copyright 1994 by TGV Inc). Chassis Interface.

3 VIP2 controllers (1 FastEthernet)(4 Ethernet)(1 Fddi)(2 PA-T3). 4 Ethernet/IEEE 802.3 interfaces.

1 FastEthernet/IEEE 802.3 interface.

2 Serial network interfaces.

1 FDDI network interface.

125K bytes of non-volatile configuration memory.

8192K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x2

8-20PA-T3 Serial Port Adapter Installation and Configuration

Image 64

Contents PA-T3 Serial Port Adapter Installation and Configuration Corporate HeadquartersPage Preface ObjectivesOrganization Section Title DescriptionRelated Documentation Related Documentation Section Title DescriptionCisco Connection Online Cisco Connection OnlineCisco Documentation CD-ROM Cisco Documentation CD-ROMOverview Port Adapter OverviewPA-T3 Serial Port Adapter Features PA-T3 Serial Port Adapter FeaturesManagement Information Base Management Information Base4PA-T3 Serial Port Adapter Installation and Configuration Preparing for Installation Parts and Tools RequiredSoftware and Hardware Requirements Software and Hardware RequirementsPA-2T3 PA-T3 Port Adapter LEDs PA-T3 Port Adapter LEDsRouter show version LEDs for Uplink Port Status Color State DescriptionFeature Compatibilities of PA-T3 Serial Port Adapter DSUs PA-T3 Receptacles and CablesPA-T3 Receptacles and Cables Full Rate Scrambling Subrate MDL 1 SupportSafety Guidelines Safety GuidelinesElectrical Equipment Guidelines Telephone Wiring GuidelinesElectrical Equipment Guidelines Preventing Electrostatic Discharge Damage FCC Class a ComplianceFCC Class a Compliance FCC Class a Compliance 10PA-T3 Serial Port Adapter Installation and Configuration VIP2 and the PA-T3 Port Adapter OverviewOverview Dimm U5PA-T3 in port adapter Slot PA-T3 in port adapter slot Removing a Port Adapter Removing a Port AdapterInstalling a Port Adapter Installing a Port AdapterH3152 Installing a Port Adapter 8PA-T3 Serial Port Adapter Installation and Configuration Catalyst RSM/VIP2 and the PA-T3 Port Adapter Standoff Removing a Port Adapter Installing a Port Adapter Aligning a Port Adapter in a Port Adapter Slot 6PA-T3 Serial Port Adapter Installation and Configuration Cisco 7200 Series PA-T3 Port Adapter Port adapter Handle Lever unlocked Position Handling a Port Adapter Port adapter Handle Cisco uBR7200 Series and the PA-T3 Port Adapter Port adapters Port adapters Port adapter lever in unlocked position Inside slot guide PC board Metal carrier Port adapter retention clip in locked position 6PA-T3 Serial Port Adapter Installation and Configuration Configuring the PA-T3 Interfaces Using the Exec Command Interpreter Using the Exec Command InterpreterIdentifying Port Adapter Slot and T3 Interface Port Numbers Cisco 7200 Series and Cisco uBR7200 Series PortsCisco 7200 Series and Cisco uBR7200 Series Ports Serial Port Number Example-CiscoVIP2 Ports Identifying Port Adapter Slot and T3 Interface Port NumbersCatalyst RSM/VIP2 Ports Catalyst RSM/VIP2 PortsCisco 7100 Series Ports PA-T3 Serial Port Adapter in the CatalystInterface Subcommand Syntax Platform Command Example Router# configure terminalShutting Down an Interface Shutting Down an InterfaceRouterconfig-if#interface serial 1/0 Routerconfig-if#interface serial 1/1Routerconfig-if#interface serial 1/1/0 Routerconfig-if#interface serial 1/1/1Routerconfig# interface serial 1/0 Router# copy running-config startup-config OKRouter# show interfaces serial 1/0 Router# show interfaces serial 1/1/0Performing a Basic Configuration Routerconfig# interface serial 1/1/0Routerconfig# interface serial 3/0 Performing a Basic ConﬁgurationConfiguration Example Conﬁguration ExampleSetting the Bandwidth Deﬁning the DSU ModeCustomizing the PA-T3 Serial Port Adapter Enabling T3 ScramblingSetting the Cable Length Conﬁguring Cyclic Redundancy ChecksSpecifying T3 Framing Specifying T3 FramingChecking the Configuration Using show Commands to Verify StatusChecking the Conﬁguration Show running-conﬁg command. Display Router# show interfaces serial 2/0 Router# show controllers 2/0 Router# show controllers serial 3/0Febe Router# show controllers serial 10/0/0 Serial10/0/0Router# show controllers serial 0/0 Serial0/0 Router# show version20PA-T3 Serial Port Adapter Installation and Configuration Router# show diag Router# show controllers cbus 1/0/0 Router# show controllers cbus 0/0 Using the loopback Command to Verify the Physical Interface Using the ping Command to Verify Network ConnectionRouterconfig# interface serial 6/0 Set the interface into local loopback mode as follows Using the loopback Command to Verify the Physical Interface26PA-T3 Serial Port Adapter Installation and Configuration Cisco 7100 Series and the PA-T3 Port Adapter Cisco 7120 Series Router-Port Adapter Slot 3 LocationCisco 7140 Series Router-Port Adapter Slot 4 Location Installing a Port Adapter Guides