Page 14
Chapter 5 Parameters and Defaults
Account Information Parameters
LoginID1
Description
This parameter is the H.323 login ID for the Phone 2 port of the Cisco ATA.
This value is used for registration and authentication if the UseLoginID parameter is set to 1.
If the LoginID0 and LoginID1 parameter values are identical, only one gatekeeper registration is performed for both ports, in which case the LoginID0 value is used as the H.323 ID, and the UID0 and UID1 parameter values are used for the two E.164 phone numbers.
Value Type
Alphanumeric string
Range
Maximum number of characters: 51
Default
0
Voice Configuration Menu Access Code
47
Related Parameters
AutMethod
Description
Use this parameter to select the desired authentication method, with the following possible values:
•0—Do not use authentication (default)
•1—Use Cisco registration-level security
•2—Use Cisco administration-level security on a per-call basis
Value Type
Bitmap
Default
0x00000000
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
Contents
Parameters and Defaults
A P T E R
Configuration Text File Template
Description
UIPassword
User Interface UI Parameter
Value Type
ToConfig
Configuration-Complete Parameter
Parameters for Configuration Method and Encryption
UseTFTP
Settings
Range Default Voice Configuration Menu Access Code
TftpURL
UseTFTP, CfgInterval,
CfgInterval
EncryptKey
UseTFTP, TftpURL,
320
Network Parameters
Dhcp
DHCP, StaticIp, StaticRoute, StaticNetMask,
StaticRoute
Voice Configuration Menu Access Code Related Parameters
StaticIp
DHCP, StaticRoute, StaticNetMask,
DHCP, StaticIp, StaticNetMask,
Account Information Parameters
StaticNetMask
255.255.255.0
UID0
UID1, PWD0, PWD1, UseLoginID, LoginID0, LoginID1,
This parameter is the password for the Phone 1 port
PWD0
UID0, PWD0, PWD1, UseLoginID, LoginID0, LoginID1,
UID1
Gateway
This parameter is the password for the Phone 2 port
PWD1
LoginID1, PWD0, PWD1, UseLoginID, AutMethod,
UseLoginID
LoginID0
AutMethod
LoginID1
LoginID0, PWD0, PWD1, UseLoginID, AutMethod,
Bitmap
AltGk, AltGkTimeOut, GkTimeToLive, GkId,
LoginID0, LoginID1, PWD0, PWD1, NTPIP, AltNTPIP,
GkOrProxy, AltGk, AltGkTimeOut, GkTimeToLive, GkId,
Gatekeeper Parameters
AltGk, ConnectMode, page 5-28-Bit
AltGkTimeOut
AltGk
GkId
Default Range
GkTimeToLive
Operating Parameters
Mode Parameter
Use H.323 mode -Use SIP mode
UseSIP
MediaPort
DNS2IP, UDPTOS, SigTimer, OpFlags, VLANSetting,
UDPTOS, VLANSetting,
LBRCodec
AudioMode, page 5-20-Bits 1 TxCodec, RxCodec, NumTxFrames,
AudioMode
RxCodec, TxCodec,
LBRCodec, ConnectMode, RxCodec,
RxCodec
Bit Number Definition
LBRCodec, NumTxFrames, RxCodec, AudioMode,
TxCodec
LBRCodec, NumTxFrames, TxCodec, AudioMode,
LBRCodec, RxCodec, TxCodec,
NumTxFrames
Examples
Bit Number
CallFeatures
CallCmd,
315
PaidFeatures
CallFeatures, CallCmd, CallerIdMethod, SigTimer,
Call waiting
CallerIdMethod
316
Polarity
0x00019e60
ConnectMode
Use G.711A-law for fax pass-through codec
TimeZone
Use G.711µ-law for fax pass-through codec
NTPIP, AltNTPIP,
Ntpip
AltNTPIP
AltNTPIP, TimeZone,
Udptos
DNS1IP
DNS2IP
NTPIP, TimeZone,
SigTimer
TftpURL, DHCP, VLANSetting,
OpFlags
VLANSetting
Syntax
Optional Feature Parameters
NPrintf
Example
IPDialPlan
Default Recommended Values
RingOnOffTime
DialPlan
Additional DialPlan Information
Following dial plan
About Dial Plan Commands
Dial Plan Example 1 Default Dial Plan
Following dial plans
Dial Plan Blocking In Rule
Dial Plan Example
Rule to Support Hotline/Warmline
Rule to Support Dial Prefix
Tone Parameter Syntax
Call-Progress Tone Parameters
List of Call-Progress Tone Parameters
This section contains the following topics
Use the following formula to calculate the scaling factor a
How to Calculate Scaling Factors
Recommended Values
DialTone
Default values for the nine-integer array
Specific Call-Progress Tone Parameter Information
920
ReorderTone
Cisco ATA plays the busy tone when the callee is busy
BusyTone
921
923
RingbackTone
CallWaitTone
924
925
CallCmd
AlertTone
Maximum of 248 characters
CallFeatures, PaidFeatures, CallerIdMethod, SigTimer,
930
OL-4008-01