Cisco Systems ATA 186 manual PaidFeatures, 315, CallFeatures, CallCmd, CallerIdMethod, SigTimer

Chapter 5 Parameters and Defaults

Operating Parameters

Table 5-2	CallFeatures Parameter Bit Definitions (continued)
Bit
Number	Definition
12-14	Reserved.
and
28-30
15 and 31	Fax mode. This service allows the user to set the Cisco ATA to Fax mode on a per-call basis.

PaidFeatures

Description

Unsubscribe/subscribe to CallFeatures by setting each corresponding bit to either 0 or 1. The lower 16 bits are for the Phone 1 port, and the upper 16 bits are for the Phone 2 port. Table 5-3provides definitions of each bit.

Value Type

Bitmap

Default

0xffffffff

Voice Configuration Menu Access Code

315

Related Parameters

•CallFeatures, page 5-24

•CallCmd, page 5-46

•CallerIdMethod, page 5-26

•SigTimer, page 5-32

Table 5-3 PaidFeatures Parameter Bit Definitions

Bit Number	Definition
0 and 16	Not used for H.323.
1 and 17	Not used for H.323.
2 and 18	Not used for H.323.
3 and 19	CLIP (if set to 1)/CLIR (if set to 0)
4 and 20	Call waiting
5 and 21	Three-way calling
6 and 22	Not used for H.323.
7 and 23	Not used for H.323.
8 and 24	Caller ID.
9 and 25	Not used for H.323.
	Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01		5-25