Cisco Systems ATA 186 manual Polarity, 0x00019e60, 316

Page 27

Chapter 5 Parameters and Defaults

Operating Parameters

Examples

The following examples are recommended values for the CallerID Method parameter:

•USA=0x19e60

•Sweden=0x0ff61 or 0x006aff61

•Denmark=0x0fde1 or 0x033efde1

Value Type

Bitmap

Default

0x00019e60

Voice Configuration Menu Access Code

316

Polarity

Description

You can control line polarity of the Cisco ATA FXS ports when a call is connected or disconnected by configuring the Polarity bitmap parameter as follows:

•Bit 0: CALLER_CONNECT_POLARITY. Polarity to use when the Cisco ATA is the caller and the call is connected.

–0 =Use forward polarity (Default)

–1 =Use reverse polarity

•Bit 1: CALLER_DISCONNECT_POLARITY. Polarity to use when the Cisco ATA is the caller and the call is disconnected.

–0 =Use forward polarity (Default)

–1 =Use reverse polarity

•Bit 2: CALLEE_CONNECT_POLARITY. Polarity to use when the Cisco ATA is the callee and the call is connected.

–0 =Use forward polarity (Default)

–1 =Use reverse polarity

•Bit 3: CALLEE_DISCONNECT_POLARITY. Polarity to use when the Cisco ATA is the callee and the call is disconnected.

–0 =Use forward polarity (Default)

–1 =Use reverse polarity

Note Bits 4-31 are reserved.

Value Type

Bitmap

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)

	OL-4008-01	5-27

Image 27

Contents A P T E R Parameters and DefaultsConfiguration Text File Template Value Type UIPasswordUser Interface UI Parameter DescriptionConfiguration-Complete Parameter Parameters for Configuration Method and EncryptionToConfig TftpURL SettingsRange Default Voice Configuration Menu Access Code UseTFTPUseTFTP, TftpURL, CfgIntervalEncryptKey UseTFTP, CfgInterval,DHCP, StaticIp, StaticRoute, StaticNetMask, Network ParametersDhcp 320DHCP, StaticRoute, StaticNetMask, Voice Configuration Menu Access Code Related ParametersStaticIp StaticRoute255.255.255.0 Account Information ParametersStaticNetMask DHCP, StaticIp, StaticNetMask,PWD0 UID1, PWD0, PWD1, UseLoginID, LoginID0, LoginID1,This parameter is the password for the Phone 1 port UID0UID1 UID0, PWD0, PWD1, UseLoginID, LoginID0, LoginID1,This parameter is the password for the Phone 2 port PWD1Gateway UseLoginID LoginID0LoginID1, PWD0, PWD1, UseLoginID, AutMethod, Bitmap LoginID1LoginID0, PWD0, PWD1, UseLoginID, AutMethod, AutMethodGatekeeper Parameters LoginID0, LoginID1, PWD0, PWD1, NTPIP, AltNTPIP,GkOrProxy, AltGk, AltGkTimeOut, GkTimeToLive, GkId, AltGk, AltGkTimeOut, GkTimeToLive, GkId,AltGkTimeOut AltGkAltGk, ConnectMode, page 5-28-Bit Default Range GkTimeToLiveGkId UseSIP Mode ParameterUse H.323 mode -Use SIP mode Operating ParametersLBRCodec DNS2IP, UDPTOS, SigTimer, OpFlags, VLANSetting,UDPTOS, VLANSetting, MediaPortLBRCodec, ConnectMode, RxCodec, AudioModeRxCodec, TxCodec, AudioMode, page 5-20-Bits 1 TxCodec, RxCodec, NumTxFrames,Bit Number Definition RxCodecTxCodec LBRCodec, NumTxFrames, TxCodec, AudioMode,LBRCodec, NumTxFrames, RxCodec, AudioMode, NumTxFrames ExamplesLBRCodec, RxCodec, TxCodec, CallFeatures CallCmd, Bit Number Call waiting PaidFeaturesCallFeatures, CallCmd, CallerIdMethod, SigTimer, 315CallerIdMethod Polarity 0x00019e60316 ConnectMode TimeZone Use G.711µ-law for fax pass-through codecUse G.711A-law for fax pass-through codec AltNTPIP, TimeZone, NtpipAltNTPIP NTPIP, AltNTPIP,NTPIP, TimeZone, DNS1IPDNS2IP UdptosSigTimer OpFlags TftpURL, DHCP, VLANSetting,VLANSetting Example Optional Feature ParametersNPrintf SyntaxDefault Recommended Values RingOnOffTimeIPDialPlan Additional DialPlan Information DialPlanAbout Dial Plan Commands Dial Plan Example 1 Default Dial PlanFollowing dial plan Dial Plan Blocking In Rule Dial Plan ExampleFollowing dial plans Rule to Support Dial Prefix Rule to Support Hotline/WarmlineThis section contains the following topics Call-Progress Tone ParametersList of Call-Progress Tone Parameters Tone Parameter SyntaxHow to Calculate Scaling Factors Recommended ValuesUse the following formula to calculate the scaling factor a 920 Default values for the nine-integer arraySpecific Call-Progress Tone Parameter Information DialTone921 Cisco ATA plays the busy tone when the callee is busyBusyTone ReorderTone924 RingbackToneCallWaitTone 923Maximum of 248 characters CallCmdAlertTone 925930 CallFeatures, PaidFeatures, CallerIdMethod, SigTimer,OL-4008-01

Related manuals

Manual 208 pages 28.48 Kb

Manual 64 pages 26.31 Kb

Manual 208 pages 5.39 Kb

Manual 166 pages 49.11 Kb

Manual 14 pages 13.53 Kb