Cisco Systems ATA 186 manual Optional Feature Parameters, NPrintf, Syntax, Example

Chapter 5 Parameters and Defaults

Optional Feature Parameters

•Bits 18-29—User-specified 802.1Q VLAN ID.

•Bits 30-31—Reserved.

Value Type

Bitmap

Default

0x0000002b

Voice Configuration Menu Access Code

324

Related Parameter

OpFlags, page 5-33

Optional Feature Parameters

This section includes the parameters used to configure various timeout values and call-progress tones:

•NPrintf, page 5-35

•RingOnOffTime, page 5-36

•IPDialPlan, page 5-36

•DialPlan, page 5-37

•Call-Progress Tone Parameters, page 5-41

•CallCmd, page 5-46

NPrintf

Description

Use this parameter to specify the IP address and port of a host to which all Cisco ATA debug messages are sent. The program prserv.exe, which comes bundled with the Cisco ATA software, is needed to capture the debug information.

Syntax

<HOST_IP>,<HOST_PORT>

Example

If the program prserv.exe is running on a host with IP address 192.168.2.170 and listening port 9001, set NPrintf to 192.168.2.170.9001. This causes the Cisco ATA to send all debug traces to that IP address.

Value Type

Extended IP address

Default

0

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)

OL-4008-01 5-35