Fujitsu Siemens Computers 19T2 manual Setting language for the OSD menu Language

Page 21

Color monitor 19T2

Setting language for the OSD menu (LANGUAGE)

A

Setting language for the OSD menu

You can choose from English (default setting), German, French, Spanish, Italian, Swedish, Dutch, Russian and Japanese.

Setting monitor options (OPTION)

You can degauss the monitor in the settings window OPTION, you can set the Moiré correction, change the OSD position, lock/release the buttons for monitor settings and restore original monitor colors.

The set value for the Moiré correction is only saved for the current input signal. The other values are independent of a change in the input signal.

Calling the OPTION setting window

Degaussing the monitor (MANUAL DEGAUSS)

The monitor is degaussed every time you switch it on. When color shifts occur in the screen display due to the influence of magnetic fields, the screen must be degaussed manually.

Press the button . The monitor is degaussed for approximately 3 seconds.

If the monitor is to be degaussed a second time, please wait approximately 20 minutes before executing the function again.

Correcting the Moiré effect (MOIRE ADJUST)

If the picture you see on screen has light and dark stripes or appears dull and blurred, this may be due to what is known as the moiré effect. This effect usually has physical causes, being triggered by interference between the pixels in the matrix and the video signal. The intensity of the moiré effect is dependent on the screen resolution and horizontal frequency.

Setting horizontal position of the OSD menu (OSD H POSITION)

You can change the OSD position, for example, when you want to adjust the picture behind an OSD window.

Setting vertical position of the OSD menu (OSD V POSITION)

You can change the OSD position, for example, when you want to adjust the picture behind an OSD window.

Lock/unlock buttons for adjusting the monitor (CONTROL LOCK)

With this option all buttons on the front of the monitor (with the exception of the menu button and the on/off switch) can be locked and unlocked again.

OFF = unlocked ON = locked

If ON has been selected, only the symbols OPTION or EXIT can be selected in the main menu. If - with the OSD menu hidden - a button other than the menu button or the on/off switch is pressed, the key symbol appears on the screen.

A26361-K616-Z100-2-5E19

English - 13

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 19T2 Sie haben Page A26361-K616-Z100-1-5E19 Ausgabe Juli 2000 July 2000 edition Betriebsanleitung Operating ManualPage Contents Page Notational conventions IntroductionTarget group Further informationImportant notes SafetyManufacturers notes Cleaning note19T2Transport notes Energy StarFor the United Kingdom Important note on power cableChecking the contents of the consignment Connecting the monitor Installing an ergonomic video workstationData cable Switching the monitor on Switching the monitor offOperation of the monitor Changing the monitor settings Operating the OSD menu Adjusting the contrast and brightnessSetting the picture geometry Geometry Setting picture position and size SIZE/CENTERSetting convergence Convergence Setting color temperature and colors ColorSetting monitor options Option Setting language for the OSD menu LanguageActivating the factory settings Resetting a selected function to the factory settingOpen Help menu Help Resetting all settings for all input signals Resetting all settings for the current input signalDimensions and weight Technical dataAccessories Storable display modes Electrical data Environmental conditionsVESA-DDC-compatible VGA interface Preset operating modesPin assignment D-SUB 15-pin Tilting and turning areaPin Meaning Error handling Self-diagnosisPossible malfunctions Monitor adjustment buttons do not react Two fine horizontal lines wires are visibleScreen display is too small or not centered Picture geometry is defectiveHumming noise is heard after switch-on Error messages on the screen
Top Page Image Contents