Fujitsu Siemens Computers 19T2 manual Two fine horizontal lines wires are visible

Page 28

Color monitor 19T2

Two fine horizontal lines (wires) are visible

Your monitor is equipped with a Trinitron picture tube, which enables more light to reach i the screen with a vertical slot mask, and therefore produces more intense colors. The

thin lines visible with a white background are shadows of the damper wires, which stabilize the vertical slot mask. They are characteristic of picture tubes with a vertical slot mask. There is no malfunction.

The screen display is too small or not centered

The monitor recognizes an undefined mode (see "Technical data").

 

i

To display the current mode (horizontal frequency and refresh rate), press the

or

 

buttons.

 

 

Ê

 

Press the picture size/position button

to automatically adjust the screen display.

 

Ê

 

Correctly adjust the picture size and position with the OSD menu (see "Operation of the

 

 

 

monitor", section "Setting picture position and size (SIZE/CENTER)").

 

Picture geometry is defective

ÊCorrectly adjust the picture geometry with the OSD menu (see "Operation of the monitor", section "Setting picture geometry (GEOMETRY)").

Colors are impure or shifted

ÊDegauss the monitor (see "Operation of the monitor", section "Setting monitor options (OPTION)").

ÊSet the convergence (see "Operation of the monitor", section "Setting convergence (CONVERGENCE)").

White does not look white

ÊSet the color temperature (see "Operation of the monitor", section "Setting color temperature and colors (COLOR)").

Screen display has lines, is dull or blurred

ÊSet the brightness and contrast (see "Operation of the monitor").

ÊDegauss the monitor (see "Operation of the monitor", section "Setting monitor options (OPTION)").

ÊSet the convergence and reduce the Moiré correction (see "Operation of the monitor", section "Setting monitor options (OPTION)").

The screen display is flickering

ÊSet an ergonomic refresh rate (≥ 75 Hz) using the PC software (see documentation for your PC or your screen controller/graphics card).

Monitor adjustment buttons do not react

The buttons have probably been locked with the OSD menu.

ÊUnlock the monitor adjustment buttons (see "Operation of the monitor", section "Setting monitor options (OPTION)").

20 - English

A26361-K616-Z100-2-5E19

Page 27 Page 29
Image 28
Page 27 Page 29
Contents 19T2 Sie haben Page A26361-K616-Z100-1-5E19 Betriebsanleitung Operating Manual Ausgabe Juli 2000 July 2000 editionPage Contents Page Introduction Notational conventionsTarget group Further informationSafety Important notesCleaning note19T2 Manufacturers notesTransport notes Energy StarImportant note on power cable For the United KingdomChecking the contents of the consignment Installing an ergonomic video workstation Connecting the monitorData cable Switching the monitor off Switching the monitor onOperation of the monitor Changing the monitor settings Adjusting the contrast and brightness Operating the OSD menuSetting picture position and size SIZE/CENTER Setting the picture geometry GeometrySetting color temperature and colors Color Setting convergence ConvergenceSetting language for the OSD menu Language Setting monitor options OptionResetting a selected function to the factory setting Activating the factory settingsOpen Help menu Help Resetting all settings for the current input signal Resetting all settings for all input signalsTechnical data Dimensions and weightAccessories Storable display modes Electrical data Environmental conditionsPreset operating modes VESA-DDC-compatible VGA interfaceTilting and turning area Pin assignment D-SUB 15-pinPin Meaning Self-diagnosis Error handlingPossible malfunctions Two fine horizontal lines wires are visible Monitor adjustment buttons do not reactScreen display is too small or not centered Picture geometry is defectiveError messages on the screen Humming noise is heard after switch-on
Top Page Image Contents