Cisco Systems OL-17037-01 manual 20 802.11b/g/n Cisco APs Configure

Chapter 7 Controlling Lightweight Access Points

Optimizing RFID Tracking on Access Points

Step 2 Click the name of the access point for which you want to configure monitor mode. The All APs > Details for page appears.

Step 3 From the AP Mode drop-down box, choose Monitor.

Step 4 Click Apply to commit your changes.

Step 5 Click OK when warned that the access point will be rebooted.

Step 6 Click Save Configuration to save your changes.

Step 7 Click Wireless > Access Points > Radios > 802.11b/g/n to open the 802.11b/g/n Radios page.

Step 8 Hover your cursor over the blue drop-down arrow for the desired access point and choose Configure. The 802.11b/g/n Cisco APs > Configure page appears (see Figure 7-20).

Figure 7-20 802.11b/g/n Cisco APs > Configure Page

Step 9 To disable the access point radio, choose Disable from the Admin Status drop-down box and click Apply.

Step 10 To enable tracking optimization on the radio, choose Enable from the Enable Tracking Optimization drop-down box.

Step 11 From the four Channel drop-down boxes, choose the channels on which you want to monitor RFID tags.

Note You must configure at least one channel on which the tags will be monitored.

	Cisco Wireless LAN Controller Configuration Guide
7-60	OL-17037-01