Cisco Systems OL-17037-01 manual Config advanced timers ap-discovery-timeout interval

Chapter 7 Controlling Lightweight Access Points

Configuring Backup Controllers

Step 7 To configure the access point heartbeat timer, enter this command: config advanced timers ap-heartbeat-timeoutinterval

where interval is a value between 1 and 30 seconds (inclusive). This value should be at least three times larger than the fast heartbeat timer. The default value is 30 seconds.

Step 8 To configure the access point primary discovery request timer, enter this command: config advanced timers ap-primary-discovery-timeoutinterval

where interval is a value between 30 and 3600 seconds. The default value is 120 seconds. Step 9 To configure the access point discovery timer, enter this command:

config advanced timers ap-discovery-timeout interval

where interval is a value between 1 and 10 seconds (inclusive). The default value is 10 seconds. Step 10 To configure the 802.11 authentication response timer, enter this command:

config advanced timers auth-timeout interval

where interval is a value between 10 and 600 seconds (inclusive). The default value is 10 seconds. Step 11 To save your changes, enter this command:

save config

Step 12 To view an access point’s configuration, enter these commands:

•show ap config general Cisco_AP

•show advanced backup-controller

•show advanced timers

Information similar to the following appears for the show ap config general Cisco_AP command:

Cisco AP Identifier	1
Cisco AP Name	AP5
Country code	US	- United States
Regulatory Domain allowed by Country	802.11bg:-AB		802.11a:-AB
AP Country code	US	- United States
AP Regulatory Domain	802.11bg:-A		802.11a:-N
Switch Port Number	1
MAC Address	00:13:80:60:48:3e
IP Address Configuration	DHCP
IP Address	1.100.163.133
...
Primary Cisco Switch Name	1-4404
Primary Cisco Switch IP Address	2.2.2.2
Secondary Cisco Switch Name	1-4404
Secondary Cisco Switch IP Address	2.2.2.2
Tertiary Cisco Switch Name	2-4404
Tertiary Cisco Switch IP Address	1.1.1.4
...

Information similar to the following appears for the show advanced backup-controllercommand:

AP	primary Backup Controller	controller1 10.10.10.10
AP	secondary Backup Controller	0.0.0.0

	Cisco Wireless LAN Controller Configuration Guide
OL-17037-01		7-45