Cisco Systems A03D600GA2 manual Configuring the Server

CONFIGURING the SERVER

CONFIGURING the SERVER

Follow these steps to configure the Cisco UCS C220 M3 High-Density SFF Rack Server:

■STEP 1 VERIFY SERVER SKU, page 12

■STEP 2 SELECT CPU(s), page 13

■STEP 3 SELECT MEMORY, page 16

■STEP 4 SELECT RAID CONFIGURATION, page 22

■STEP 5 SELECT HARD DISK DRIVES (HDDs) or SOLID STATE DRIVES (SSDs), page 29

■STEP 6 SELECT PCIe OPTION CARD(s), page 31

■STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES, page 34

■STEP 8 ORDER POWER SUPPLY, page 38

■STEP 9 SELECT AC POWER CORD(s), page 39

■STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM, page 42

■STEP 11 ORDER A TRUSTED PLATFORM MODULE (OPTIONAL), page 43

■STEP 12 ORDER CISCO FLEXIBLE FLASH SD CARD MODULE (OPTIONAL), page 44

■STEP 13 ORDER OPTIONAL USB 2.0 DRIVE, page 45

■STEP 14 SELECT OPERATING SYSTEM AND VALUE-ADDED SOFTWARE, page 46

■STEP 15 SELECT OPERATING SYSTEM MEDIA KIT, page 49

■STEP 16 SELECT SERVICE and SUPPORT LEVEL, page 50

■OPTIONAL STEP - ORDER RACK(s), page 55

■OPTIONAL STEP - ORDER PDU, page 56

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model) 11