Cisco Systems A03D600GA2 manual Acpi

Page 10

BASE SERVER STANDARD CAPABILITIES and FEATURES

Capability/Feature	Description

Interfaces	■ Rear panel
	• One RJ45 serial port connector
	• Two USB 2.0 port connectors
	• One DB15 VGA connector
	• Two RJ-45 10/100/1000 Ethernet port connectors
	• One RJ-45 10/100/1000 Ethernet management port, using Cisco
	Integrated Management Controller (CIMC) firmware
	■ Various PCIe card ports (dependent on which cards are installed)
	• Converged Network Adapter (CNA) ports
	• Network Interface Card (NIC) ports
	• Host Bus Adapter (HBA) ports
	■ Front panel
	• One KVM console connector (supplies two USB, one VGA, and one
	serial connector)
WoL	The 1-Gb Base-T Ethernet LAN ports support the wake-on-LAN (WoL)
	standard.
InfiniBand	The bus slots in this server support the InfiniBand architecture.
Front Panel	A front panel controller provides status indications and control buttons
Power subsystem	Up to two 450 W (AC) , 650 W, (AC), or 930 W (DC) power supplies. One is
	mandatory; one more can be added for 1 + 1 redundancy.

ACPI

Fans

Integrated management processor

This server supports the advanced configuration and power interface (ACPI) 4.0 standard.

Chassis:

■Five hot-swappable fans for front-to-rear cooling Power supply:

■Each power supply is equipped with a fan.

BMC running Cisco Integrated Management Controller (CIMC) firmware.

Depending on your CIMC settings, the CIMC can be accessed through the

1-GbE dedicated management port, the 1-GbE LOM ports, or a Cisco virtual interface card (VIC).

10	Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

Image 10

Contents Spec Sheet SAN JOSE, CA REV C.18 December 17Step Verify Server SKU StepContents Page Overview Chassis Front View Shows the Cisco UCS C220 M3 High-Density SFF Rack ServerShows the external features of the rear panel Chassis Rear ViewCPU Capabilities and Features Capability/Feature DescriptionChassis One rack unit 1RU chassis NICCapability/Feature Description Acpi Configuring the Server Verify the product ID PID of the server as shown in Table Verify Server SKUCards, with 1 rail kit Product ID PID Freq Size Cores Select CPUsDDR3 Dimm QPINumber GHz Support MHz1 Intel Xeon E5-26002 Select two identical CPUs from any one of the rows of on Approved Configurations CPU configurationsSelect any one CPU listed in Table CaveatsSelect Memory C220 M3 SFF Memory OrganizationDimm Options Select DIMMs and Memory MirroringDimm Memory Mirroring OptionCPU configuration with memory mirroring A1, B1 A1,B1 C1,D1 A1,B1, C1 A2, B2, C2 A2,B2 C2,D2A1, B1 E1, F1 A1,B1 C1,D1 Dimm Memory Speeds DPCConfiguring the Server Select RAID Configuration Product ID PID PID Description RAID Controllers Select RAID OptionsAvailable Embedded RAID Options UCSC-RAID-ROM5UCSC-RAID-11-C220 UCSC-RAID-MZ-220Available PCIe RAID Controller Options RAID Configuration Options not available for embedded RAIDSuper Capacitor Option Approved Configurations RAID RAID1 RAID4Caveats HDDs Select DrivesSSDs You can mix Sata and SAS drives Network Interface Cards NICs Select PCIe Option CardsHost Bus Adapters HBAs UCS Storage Accelerators Approved Configurations No PCIe RAID controllerOne PCIe RAID controller Configuring the Server Available Twinax Cables Product ID PID PID Description Order Optional Network Card AccessoriesChoose Optional Twinax Cables Choose Optional SFP ModulesCaveats Cisco VIC 1225 Dual Port 10Gb SFP+ CNA Preinstalled do not change SFPBroadcom 57712 Dual Port 10Gb SFP+ w/TOE iSCSI Cisco VIC 1225T Dual Port 10GBaseT CNANetwork Card Connections UCSC-PSU-450W Order Power SupplyPower Supply PIDs UCSC-PSU-650WCAB-N5K6A-NA Available Power Cords Product ID PID PID Description ImagesR2XX-DMYMPWRCORD CAB-C13-CBNCAB-9K10A-AU CAB-9K10A-EUAvailable Power Cords Product ID PID PID Description UCSC-CMA1 Order Optional Reversible Cable Management ARMCable Management Arm Cable Management Arm for C220 rack serversTrusted Platform Module Product ID PID PID Description Order a Trusted Platform Module OptionalUCSX-TPM1-001 Trusted Platform Module Second Secure Digital SD Card blank Order Cisco Flexible Flash SD Card Module OptionalSecure Digital SD Card preloaded with software UCS-SD-16GUSB 2.0 Drive See on page 57 for the location of the USB connectorOrder Optional USB 2.0 Drive UCS-USBFLSH-S-4GBSelect Operating System and VALUE-ADDED Software SuseNexus 1000V for Hyper-V and vSphere BMCUCS Director Configuring the Server Select Operating System Media KIT OS Media Product ID PID PID DescriptionSMARTnet for UCS Unified Computing Warranty, No ContractCisco SMARTnet for UCS Service Product ID PID On Site? DescriptionCON-UCW5-C220M3SF CON-UCW7-C220M3SFUCS HW 24X7X4OS UCS C220 M3 SFF UC Plus 8X5XNBDOS UCS C220 M3 SFFUnified Computing Combined Support Service Partner Support Service for UCSService Product ID PID Level Description Site? GSPUCSD7 UCS DR UCSD7UCWD5 UCWD7CON-UCWD7-C220M3SF CON-UCWD5-C220M3SFRacks and Rack Options Product ID PID PID Description RP208-30-2P-U-2 Zero RU PDU PDU OptionsFor more information about the PDU, see PDUs, Supplemental Material CPUs and DIMMs Physical LayoutCPU1 DPC Memory Population RulesDPC or 2 DPC DIMMs per Channel DPCDimm Population Order Populate the DIMMs for a CPU according to TableRecommended Memory Configuration CPU Supported Dimm Configurations Total DIMMsSupported Dimm Populations TotalLow-Voltage Dimm Considerations CPU Configurations Select one of the following Available RAID configurations are shown in this sectionRAID Details RAID Option ROM Oprom Settings Example Bios Screen for OpromSerial Port Female RJ-45 Connector Pinout Serial Port DetailsUpgrade and Servicing-Related Parts Drive Blanking Panels Motherboard Lithium BatteryCPU Removal and Installation pick n place Tool Set Adding an Additional CPU with CPU heat sinkAir Baffle Replacement Kit CPU Heat Sink Cleaning KitRacks Cisco R42610 Rack PDUs Zero Rack Unit PDU PID = RP208-30-2P-U-2KVM cable for B-Series Blade Server console port KVM Cable Product ID PID PID DescriptionN20-BKVM KVM CableMotherboard USB and SD Ports, and RAID Card Backup Location Power Specifications Dimensions and WeightUCS C220 M3 Dimensions and Weight Parameter Value Technical Specifications Input Class RSP1Output Environmental Specifications UCS C220 M3 Environmental Specifications Parameter MinimumEN300386 Compliance RequirementsCISPR24 KN24

Related manuals

Manual 146 pages 4.56 Kb