Cisco Systems A03D600GA2 manual Drive Blanking Panels, Adding an Additional CPU with CPU heat sink

Page 69

SUPPLEMENTAL MATERIAL

2.If your server contains an LSI MegaRAID SAS 9266-8i RAID controller card with battery backup (UCS-RAID-9266), the card contains a battery backup unit (UCS-RAID-BBU), which can be replaced. If your server contains an LSI MegaRAID SAS 9266-8i RAID controller card without a battery backup unit (UCS-RAID-9266NB), the card does not contain a battery backup unit (UCS-RAID-BBU); however, you can retrofit the card with a battery backup if desired. Note that you cannot retrofit a UCS-RAID-9266NB or UCS-RAID-9266 RAID card with an LSI Cachevault Power Module (also known as a Supercap).

3.You can order a replacement only for the RAID cards listed. You cannot retrofit a UCS-RAID-9266NB or UCS-RAID-9266 RAID card with an LSI Cachevault Power Module (also known as a Supercap)

4.The server is shipped with the inner rail attached to the chassis.

5.This SD card is preloaded with an image specific to the C220 server.

6.This SD card is blank. The required image for the C220 server can be downloaded to the card.

7.This part is included/configured with the server chassis.

8.This part is included with the purchase of each optional or spare Intel Xeon E5-2600 CPU processor kit.

9.This part is included with the purchase of each optional or spare Intel Xeon E5-2600 v2 CPU processor kit.

Drive Blanking Panels

A drive blanking panel (N20-BBLKD=) must be installed if you remove a disk drive from a UCS server. These panels are required to maintain system temperatures at safe operating levels, and to keep dust away from system components.

Upgrading your Server from Intel Xeon E5-2600 to Intel Xeon E5-2600 v2 CPUs (or downgrading from Intel Xeon E5-2600 v2 to Intel Xeon E5-2600 CPUs)

See the following link:

http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/CPU/IVB/install/IVB-B.html

Adding an Additional CPU (with CPU heat sink)

All Cisco UCS two CPU socket-capable servers can be upgraded from having one to having two CPUs configured. You will need to order and install a heat sink when adding any additional CPU to a server. Instructions for installing the new CPU and heat sink can be found at the following link:

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1233864

Motherboard Lithium Battery

You can order a replacement motherboard battery. Installation instructions are found at this link:

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/replace.html#wp1235772

CPU Removal and Installation (“pick n place”) Tool Set

The Pick n Place tool set includes two tools:

■Pick and pull cap tool - used to pull off the plastic protective cap covering an empty CPU socket and to remove or lift a CPU processor without touching it

■Pick and place tool - used to install a CPU in its socket without damage. Must be used each time a CPU is installed in a UCS “M3” server.

Instructions for using this tool set are found at the following link:

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents SAN JOSE, CA REV C.18 December 17 Spec SheetStep Step Verify Server SKUContents Page Overview Shows the Cisco UCS C220 M3 High-Density SFF Rack Server Chassis Front ViewChassis Rear View Shows the external features of the rear panelChassis One rack unit 1RU chassis Capabilities and Features Capability/Feature DescriptionCPU NICCapability/Feature Description Acpi Configuring the Server Verify Server SKU Verify the product ID PID of the server as shown in TableCards, with 1 rail kit DDR3 Dimm Select CPUsProduct ID PID Freq Size Cores QPINumber GHz Support MHz1 Intel Xeon E5-26002 Select any one CPU listed in Table Approved Configurations CPU configurationsSelect two identical CPUs from any one of the rows of on CaveatsC220 M3 SFF Memory Organization Select MemoryDimm Select DIMMs and Memory MirroringDimm Options Memory Mirroring OptionA1, B1 A1,B1 C1,D1 A1,B1, C1 A2, B2, C2 A2,B2 C2,D2 CPU configuration with memory mirroringA1, B1 E1, F1 A1,B1 C1,D1 DPC Dimm Memory SpeedsConfiguring the Server Select RAID Configuration Available Embedded RAID Options Select RAID OptionsProduct ID PID PID Description RAID Controllers UCSC-RAID-ROM5UCSC-RAID-MZ-220 UCSC-RAID-11-C220RAID Configuration Options not available for embedded RAID Available PCIe RAID Controller OptionsSuper Capacitor Option Approved Configurations RAID4 RAID RAID1Caveats Select Drives HDDsSSDs You can mix Sata and SAS drives Select PCIe Option Cards Network Interface Cards NICsHost Bus Adapters HBAs Approved Configurations No PCIe RAID controller UCS Storage AcceleratorsOne PCIe RAID controller Configuring the Server Choose Optional Twinax Cables Order Optional Network Card AccessoriesAvailable Twinax Cables Product ID PID PID Description Choose Optional SFP ModulesCaveats Broadcom 57712 Dual Port 10Gb SFP+ w/TOE iSCSI Preinstalled do not change SFPCisco VIC 1225 Dual Port 10Gb SFP+ CNA Cisco VIC 1225T Dual Port 10GBaseT CNANetwork Card Connections Power Supply PIDs Order Power SupplyUCSC-PSU-450W UCSC-PSU-650WR2XX-DMYMPWRCORD Available Power Cords Product ID PID PID Description ImagesCAB-N5K6A-NA CAB-C13-CBNCAB-9K10A-EU CAB-9K10A-AUAvailable Power Cords Product ID PID PID Description Cable Management Arm Order Optional Reversible Cable Management ARMUCSC-CMA1 Cable Management Arm for C220 rack serversOrder a Trusted Platform Module Optional Trusted Platform Module Product ID PID PID DescriptionUCSX-TPM1-001 Trusted Platform Module Secure Digital SD Card preloaded with software Order Cisco Flexible Flash SD Card Module OptionalSecond Secure Digital SD Card blank UCS-SD-16GOrder Optional USB 2.0 Drive See on page 57 for the location of the USB connectorUSB 2.0 Drive UCS-USBFLSH-S-4GBSuse Select Operating System and VALUE-ADDED SoftwareBMC Nexus 1000V for Hyper-V and vSphereUCS Director Configuring the Server OS Media Product ID PID PID Description Select Operating System Media KITCisco SMARTnet for UCS Service Unified Computing Warranty, No ContractSMARTnet for UCS Product ID PID On Site? DescriptionUCS HW 24X7X4OS UCS C220 M3 SFF CON-UCW7-C220M3SFCON-UCW5-C220M3SF UC Plus 8X5XNBDOS UCS C220 M3 SFFService Product ID PID Level Description Site? Partner Support Service for UCSUnified Computing Combined Support Service GSPUCS DR UCSD7 UCSD7CON-UCWD7-C220M3SF UCWD7UCWD5 CON-UCWD5-C220M3SFRacks and Rack Options PDU Options Product ID PID PID Description RP208-30-2P-U-2 Zero RU PDUFor more information about the PDU, see PDUs, Supplemental Material Physical Layout CPUs and DIMMsCPU1 DPC or 2 DPC Memory Population RulesDPC DIMMs per Channel DPCPopulate the DIMMs for a CPU according to Table Dimm Population OrderRecommended Memory Configuration Supported Dimm Populations Supported Dimm Configurations Total DIMMsCPU TotalLow-Voltage Dimm Considerations Available RAID configurations are shown in this section CPU Configurations Select one of the followingRAID Details Example Bios Screen for Oprom RAID Option ROM Oprom SettingsSerial Port Details Serial Port Female RJ-45 Connector PinoutUpgrade and Servicing-Related Parts CPU Removal and Installation pick n place Tool Set Motherboard Lithium BatteryDrive Blanking Panels Adding an Additional CPU with CPU heat sinkCPU Heat Sink Cleaning Kit Air Baffle Replacement KitRacks Cisco R42610 Rack Zero Rack Unit PDU PID = RP208-30-2P-U-2 PDUsN20-BKVM KVM Cable Product ID PID PID DescriptionKVM cable for B-Series Blade Server console port KVM CableMotherboard USB and SD Ports, and RAID Card Backup Location Dimensions and Weight Power SpecificationsUCS C220 M3 Dimensions and Weight Parameter Value Technical Specifications Class RSP1 InputOutput UCS C220 M3 Environmental Specifications Parameter Minimum Environmental SpecificationsCISPR24 Compliance RequirementsEN300386 KN24
Related manuals
Manual 146 pages 4.56 Kb
Top Page Image Contents