If you want to change your BIPAC 5100S LAN settings, click Change LAN Configuration to display the screen as shown next.
The following table describes the labels in this screen.
LABEL | DESCRIPTION |
|
|
LAN IP Address | Enter the IP address of your BIPAC 5100S in dotted decimal notation, for example, |
| 192.168.1.254 (factory default). |
|
|
LAN Subnet Mask | Enter a subnet mask in dotted decimal notation. |
|
|
DHCP |
|
|
|
DHCP Server | From the DHCP Server |
| assign IP addresses, an IP default gateway and DNS servers to computer systems |
| that support the DHCP client. Select Off to disable DHCP server. |
| When DHCP server is used, set the following items: |
|
|
Client IP Pool | This field specifies the first of the contiguous addresses in the IP address pool. |
Starting Address |
|
|
|
Size of Client IP | This field specifies the size or count of the IP address pool. |
Pool |
|
|
|
Primary DNS | Enter the IP addresses of the DNS servers. The DNS servers are passed to the |
Server | DHCP clients along with the IP address and the subnet mask. |
|
|
Secondary DNS | As above. |
Server |
|
|
|
Back | Click Back to go back to the first wizard screen. |
|
|
Finish | Click Finish to save the settings and proceed to the next wizard screen. |
|
|
22