Billion Electric Company 5100S user manual Tcp/Ip

LAN Subnet Mask	Enter a subnet mask in dotted decimal notation.
Client IP Pool	This field specifies the first of the contiguous addresses in the IP address pool.
Starting Address
Size of Client IP	This field specifies the size or count of the IP address pool.
Pool
Primary DNS	Enter the IP addresses of the DNS servers. The DNS servers are passed to the
Server	DHCP clients along with the IP address and the subnet mask.
Secondary DNS	As above.
Server
Remote DHCP	If Relay is selected in the DHCP field above then enter the IP address of the actual
Server	remote DHCP server here.
TCP/IP
IP Address	Enter the IP address of your BIPAC 5100S in dotted decimal notation, for example,
	192.168.1.254 (factory default).
IP Subnet Mask	Type the subnet mask assigned to you by your ISP (if given).
RIP Direction	Select the RIP direction from None, Both, In Only and Out Only.
RIP Version	Select the RIP version from RIP-1, RIP-2Band RIP-2M.
Multicast	IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish
	membership in a multicast group. The BIPAC 5100S supports both IGMP version 1
	(IGMP-v1) and IGMP-v2. Select None to disable it.
Apply	Click this button to save these settings back to the BIPAC 5100S.
Cancel	Click this button to reset the fields in this screen.

28