Chapter 8
Time and Date Setup
Use this screen to configure the BIPAC 5100S’s time and date settings. This chapter is not available on all models.
8.1 Configuring Time Zone
To change your BIPAC 5100S’s time and date, click Time Zone. The screen appears as shown. Use this screen to configure the BIPAC 5100S’s time based on your local time zone.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Time Server
Use Time Server Select the time service protocol that your time server sends when you turn on the when Bootup BIPAC 5100S. Not all time servers support all protocols, so you may have to check
with your ISP/network administrator or use trial and error to find a protocol that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
47