The following table describes the labels in this screen.
LABEL | DESCRIPTION |
|
|
Reset ADSL Line | Click this button to reinitialize the ADSL line. The large text box above then displays |
| the progress and results of this operation, for example: |
| "Start to reset ADSL |
| Loading ADSL modem F/W... |
| Reset ADSL Line Successfully!" |
|
|
ATM Status | Click this button to view ATM status. |
|
|
ATM Loopback Test | Click this button to start the ATM loopback test. Make sure you have configured at |
| least one PVC with proper VPIs/VCIs before you begin this test. The BIPAC 5100S |
| sends an OAM F5 packet to the DSLAM/ATM switch and then returns it (loops it |
| back) to the BIPAC 5100S. |
| The ATM loopback test is useful for troubleshooting problems with the DSLAM and |
| ATM network. |
|
|
Upstream Noise | Click this button to display the upstream noise margin. |
Margin |
|
|
|
Downstream Noise | Click this button to display the downstream noise margin. |
Margin |
|
|
|
Back | Click this button to go back to the main Diagnostic screen. |
|
|
65