The following table describes the labels in this screen.
LABEL | DESCRIPTION |
|
|
Start Port No. | Enter a port number in this field. |
| To forward only one port, enter the port number again in the End Port No. field. |
| To forward a series of ports, enter the start port number here and the end port number |
| in the End Port No. field. |
|
|
End Port No. | Enter a port number in this field. |
| To forward only one port, enter the port number again in the Start Port No. field |
| above and then enter it again in this field. |
| To forward a series of ports, enter the last port number in a series that begins with the |
| port number in the Start Port No. field above. |
|
|
IP Address | Enter your server IP address in this field. |
|
|
Save | Click Save to save your changes back to the BIPAC 5100S. |
|
|
Cancel | Click Cancel to return to the previous configuration. |
|
|
6.6 Configuring Address Mapping
Ordering your rules is important because the BIPAC 5100S applies the rules in the order that
41