Cisco Systems UBR7225VXR Powering On the Cisco uBR7225VXR Router, Connecting AC-Input Power

Chapter 3 Installing the Cisco uBR7225VXR Router

Powering On the Cisco uBR7225VXR Router

Figure 3-14 Connecting AC-Input Power

1		2
	PWR-UBR7225VXR-AC
5	100-240 VAC
	4-2 A
4	50-60 Hz
	Input	Output
	OK	OK
		271670

3

1	Power switch	4	Power receptacle
2	Handle	5	Captive installation screw
3	AC power cable

Step 3 Plug the AC power supply cable into the AC power source.

Step 4 Repeat Step 1 through Step 3 for the second power supply (if present).

This completes the procedure for connecting AC-input power. Proceed to the “Powering On the Cisco uBR7225VXR Router” section on page 3-18.

Powering On the Cisco uBR7225VXR Router

After installing your Cisco uBR7225VXR universal broadband router and connecting cables, power on the universal broadband router as follows:

Step 1 Check for the following:

•Each cable interface line card is inserted in its slot and its captive installation screws are tightened.

•The network processing engine is inserted in to its slot and the captive installation screws are tightened.

Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide

3-18 OL-17309-02