Cisco Systems WRV54G manual Wireless Network Access See Figure

Wireless-G VPN Broadband Router

Wireless Network Access (See Figure 6-13.)

Wireless Network Access. If this function is enabled, only the computers on the list will be allowed access to the wireless network. To add a computer to the network, click the Permit to access button, and enter the MAC address in the fields. Click the Select MAC Address From Networked Computers button, and the screen in Figure 6-15 will appear.

Select the MAC Address from the list and click the Select button.

To prevent access, click the Prevent from accessing button, then click Select MAC Address from the list. From the screen in Figure 6-14, select the MAC Address from the list, and click the Select button.

Click the Refresh button if you want to refresh the screen. Click the Close button to return to th previous screen.

When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.

Chapter 6: Configuring the Router

Figure 6-13: Wireless Network Access

Figure 6-14: Networked Computers

28

The Wireless Tab