Cisco Systems WRV54G manual Log, UPnP, Email Alert, Syslog Notification

Wireless-G VPN Broadband Router

•SNMP Trap-Community. Enter the password required by the remote host computer that will receive trap messages or notices sent by the Router.

•SNMP Trap-Destination. Enter the IP address of the remote host computer that will receive the trap messages.

UPnP

UPnP allows Windows XP to automatically configure the Router for various Internet applications, such as gaming and videoconferencing. To enable UPnP, click Enabled.

•Allow User to make Configuration Changes. When enabled, this feature allows you to make manual changes while still using the UPnP feature.

•Allow users to disable Internet access. When enabled, this feature allows you to prohibit any and all Internet connections.

When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.

Log

The Log tab, shown in Figure 6-31, provides you with a log of all incoming and outgoing URLs or IP addresses for your Internet connection.

Email Alert

To enable E-Mail Alert, click Enabled.

•E-Mail Address for General Logs. Enter the E-Mail Address for General Logs in the field.

•E-Mail Address for Alert Logs. Enter the E-Mail Address for Alert Logs in the field.

•Return E-Mail address. Enter the address for the return E-Mail.

•E-Mail Server IP Address. Enter the IP Address of the E-Mail Server in the fields.

Syslog Notification

To enable Syslog, click Enabled.

• Device Name. Enter the Device Name in the field.

Chapter 6: Configuring the Router

Figure 6-31: Log

42

The Administration Tab