Cisco Systems WRV54G manual Wep

Wireless-G VPN Broadband Router

Other Options

•Unauthorized IP Blocking. Click Enabled to block unauthorized IP addresses. Enter in the Rejects Number field to specify how many times IKE must fail before blocking that unauthorized IP address. Enter the length of time that you specify (in seconds) in the Block Period field.

When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes. For further help on this tab, click the Help button.

Security

802.1x (See Figure 6-20.)

•Radius Server IP Address. Enter the Radius Server IP Address in the fields.

•Radius Server Port. Enter the Radius Server Port in the field.

•Shared Secret. Enter the Shared Secret in the field.

•Authentication Type. To enable EAP-TLS, click EAP-TLS. To enable EAP-TTLS, click EAP-TTLS. To enable EAP- MD5, click EAP-MD5,. To disable authentication, click Disable.

•WEP Settings. Click the WEP Settings button to edit the settings and Figure 6-21 will appear.

•Dynamic WEP Key Length. Select 64 or 128 bits from the drop-down menu.

•Key Renewal Timeout. Enter the time in seconds for key renewal.

•Port Inactivity Timeout. Enter the time in seconds for port inactivity.

•Port Connectivity Timeout. Enter the time in seconds for port connectivity.

When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.

WEP

The WEP screen allows you to configure your WEP settings. (See Figure 6-21.) WEP encryption should always be enabled to increase the security of your wireless network. Default Transmit Key. Select which WEP key (1-4) will be used when the Router sends data. Make sure that the receiving device is using the same key.

Chapter 6: Configuring the Router

Figure 6-20: 802.1x

34

The Security Tab