Philips HC8850 manual Audio Connections, Basic operation, Option 2 figure

Page 8

XP SBC HC 8850/00-1 19-03-2002 14:45 Pagina 8

Audio Connections

Basic operation

English

7Adjust the volume to the desired level with the headphone volume control.

Option 2 (figure 5)

Connecting the FM transmitter to a headphone output of an audio source

IMPORTANT

Use only 1 of the audio inputs:

3.5 mm stereo headphone audio input OR the line audio input!

Using both audio inputs at the same time may damage your FM wireless system or your audio source!

1Connect the 2 RCA plugs of the stereo audio cable to the FM transmitter’s audio input 2:

–Check if the red RCA plug (right channel) is connected to the right channel (red) of the FM transmitter’s audio input 2.

–Check if the white RCA plug (left channel) is connected to the left channel (white) of the FM transmitter’s audio input 2.

2Connect the 3.5mm stereo plug of the stereo audio cable to the headphone output of an audio source, such as TV, HiFi or PC.

–In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3 mm stereo adapter plug.

3Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.

4Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.

5To tune, press and hold the tuning control button for about 1 second. Repeat if necessary until the red tuning indication lights up.

6Adjust the volume to the desired level with the headphone volume control.

Basic operation

When the FM transmitter is connected to a:

-line output of an audio source, such as REC OUT or LINE OUT or

-headphone output of an audio source.

1Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.

2Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter.

3To tune, press and hold the tuning control button for about 1 second. Repeat if necessary until the red tuning indication lights up.

4Adjust the volume to the desired level with the headphone volume control.

5Push the SRS™ on/off button to switch the SRS™ surround sound mode on or off.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents HC8850 8850/00-1 Index Introduction General information CongratulationsKit contents General information ControlsControls Installation Transmitter power supplyHeadphone power supply Headphone figureHeadphone battery replacement figure Audio ConnectionsAudio Connections Option 1 figureAudio Connections Basic operationOption 2 figure Basic operationTroubleshooting Problem RemedyNo sound Distorted soundTroubleshooting MaintenanceSpecifications RegulationsIntroduction Information générale FélicitationsCommandes Contenu de léquipementSystème de charge automatique Transmission facileCommandes Installation Panneau de commandesAlimentation de lémetteur Alimentation du casque découteEnlevez les coussins auriculaires Connexions AudioConnexions Audio Connexions Audio Utilisation de baseProblème Solution Dépistage des pannesPas de son Distorsion sonoreEntretien Spécifications RégulationsIntroducción Información general ¡EnhorabuenaMandos Contenido del kitMandos InstalaciónFuente de alimentación del transmisor Fuente de alimentación de los auricularesInstalación Conexiones de audioCambio de las pilas de los auriculares figura Conexiones de audioConexiones de audio Opción 2 figuraFuncionamiento básico Cuando el transmisor de FM está conectado a unaResolución de problemas Problema SoluciónNo hay sonido Sonido distorsionado¡Cuidado de sus oídos MantenimientoDistorsión % THD Separación de canales 30 dB Especificaciones ReglamentoAuriculares HC8855 Modulación Einführung Allgemeine Informationen Herzlichen GlückwunschInformationen zum Umweltschutz Allgemeine Informationen BedienelementeInhalt des Satzes BedienelementeInstallation Sender-StromversorgungKopfhörer-Stromversorgung Bedienfeld Kopfhörer AbbildungInstallationAudioanschlüsse AudioanschlüsseEntfernen Sie die Ohrpolster Option 1 AbbildungEinen Kopfhörerausgang einer Audioquelle AudioanschlüsseOption 2 Abbildung Problem Abhilfe FehlersucheKein Sound Verzerrter SoundPflege TTE-Richtlinie 1999/5/EWG Technische DatenVorschriften Inleiding Algemene informatie GefeliciteerdBedieningselementen Inhoud van de setEenvoudig zenden Meerdere hoofdtelefoons met één zenderBedieningselementenInstallatie Voeding van de zenderVoeding van de hoofdtelefoon Ingeleverd wordenInstallatieAudioaansluitingen AudioaansluitingenBij voorkeur Philips Plaats de oorkussens terug op de hoofdtelefoonBasisbediening AudioaansluitingenMogelijkheid 2 figuur Verhelpen van storingen Probleem OplossingGeen geluid Vervormd geluidOnderhoud Technische gegevens Voorschriften Se il sistema non deve essere usato Introduzione Informazioni generaliCongratulazioni Informazione ecologica Informazioni generali ComandiContenuto del kit Comandi Installazione Volume regolate il volume al livello di ascolto desideratoAlimentazione della trasmittente Alimentazione della cuffiaOpzione 1 figura Installazione Collegamenti audioCollegamenti audio Opzione 2 figura Funzionamento di baseProblema Rimedio Ricerca dei guastiAssenza di suono Suono distortoSicurezza dascolto ManutenzioneCaratteristiche Regolazioni Direttiva R&TTE 1999/5/CEIntrodução Informação geral ParabénsInformação relativa ao ambiente ComandosConteúdo do kit Comandos InstalaçãoAlimentação de corrente para o transmissor Alimentação de corrente para os auscultadoresInstalação Ligações de áudioLigações de áudio Desmonte as almofadas auricularesLigações de áudio Opção 2 figuraFuncionamento básico Saída de auscultadores de uma fonte de áudioResolução de problemas Problema SoluçãoNão há som Som com distorçãoManutenção Especificações RegulamentaçõesAuscultadores HC8855 Modulação Distorção % THD Separação de canais 30 dBIntroduktion Generelle informationer Til lykkeSættet indeholder Let transmissionMiljøinformation BetjeningspladeHovedtelefon figur BetjeningsanordningerInstallationTransmitterens strømforsyning InstallationAudio-tilslutninger Udskiftning af batterier i hovedtelefonen figurAudio-tilslutninger Option 1 figurHovedtelefonudgangen på en audio-kilde Audio-tilslutningerOption 2 figur Problemløsning Problem AfhjælpningIngen lyd Forvrænget lydSikkerhed mod høreskader VedligeholdelseEU-lovgivning SpecifikationerLovgivning

HC8850 specifications

The Philips HC8850 is a professional-grade hair clipper that offers exceptional performance for both home users and barbering professionals. Renowned for its precise cutting ability, this clipper is powered by advanced technologies that ensure a smooth and efficient grooming experience.

One of the standout features of the HC8850 is its DualCut technology, which incorporates an extra sharp blade design. This innovative technology enables the clipper to cut 2 times faster than traditional models, making it ideal for users who value time without compromising on quality. The blades are designed to remain sharp even after extensive use, ensuring longevity and sustained performance.

The HC8850 is equipped with self-sharpening stainless steel blades, which is a significant advantage. This self-sharpening feature not only maintains the cutting efficiency over time but also minimizes the need for blade replacements, ultimately saving users both time and money.

Another key characteristic of the Philips HC8850 is its adjustable hair length settings. The clipper includes a variety of length combs, allowing users to easily choose their desired hair length from short styles to longer cuts. With settings ranging from 0.5mm to 42mm, it caters to a wide range of grooming preferences, making it versatile enough for any style.

The clipper's ergonomic design ensures comfortable handling, allowing for extended use without causing strain. This is particularly beneficial for professional barbers who may use the device for long periods. The lightweight nature of the clipper enhances maneuverability, providing an enjoyable grooming experience.

The HC8850 also features a powerful lithium-ion battery that offers a substantial runtime. Users enjoy up to 90 minutes of cordless usage after a quick 1-hour charge, providing ample time for multiple haircuts or touch-ups without the hassle of cords.

Additionally, the Philips HC8850 includes a cleaning brush and oil for maintenance, promoting hygiene and performance longevity. The device's easy-to-clean design, with detachable blades, ensures that keeping the clipper in top condition is a straightforward task.

In summary, the Philips HC8850 is a sophisticated hair clipper equipped with cutting-edge features and technologies, designed to deliver an efficient and high-quality grooming experience. Whether for personal use or professional applications, the HC8850 stands out as a reliable choice for achieving precise and stylish haircuts.
Top Page Image Contents